Subcategories
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
Hydroturf carpet for Yamaha superjet 96 and + hand jet ref. HT751 All Hydroturf Products are made to measure and individually. They require a minimum production time of 15 working days. They will not be taken back or exchanged.
Hydroturf Mat for Yamaha Superjet (96-16) Hand Jet with Blowsion Footrests ref. HT751FD All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Fuel sensor from Blowsion for Yamaha jetskis, Superjet 650 and 700 models from 1990 to 2020 Reference: 01-02-501
Pump Shoe plastic 144mm Rick Roy Reference: PM-SH-PLAS-144 This part is made of lightweight plastic from RRP. It fits Rickter, Superjet, Blaster and any other hull using a 144mm Yamaha pump.
Hydroturf Mat for Yamaha Superjet (96-16) Hand Jet with Wamilton Footrests ref. HT751F All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
RRP transmission coupler for all Rickter and Yamaha except 66M/66E/66V Reference: RRP-EG-CPL
JETTRIM central mat for Yamaha superjet 96 and above hand jet ref. YSJ103-B
SOLAS shovel scoop for Yamaha Wave Blaster 700 (93-97) / Superjet 700 (94 and +) Ref: YB-IG-B
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Riva Racing 'Pro-Bar' 0° black handlebar with reinforcement bar for jet skis References: RY201BK-BAR-2
Original workshop manual in paper format for Yamaha hand jet, Superjet 700 model from 1996 to 2012 Reference: LIT-18616-01-43
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
PROX piston kit (piston + segments + pin + circlips) for Yamaha 700cc jet-ski ref. 01.2510.X
Steering stop pad support for Rick Roy aluminum arm (4 colors to choose from) Ref: ST-STOP-UNIV-BLK (black) Ref: ST-STOP-UNIV-RD (red) Ref: ST-STOP-UNIV-GN (green) Ref: ST-STOP-UNIV-BLU (blue)
Adjustable bonnet lock in anodised aluminium and machined from solid RRP Reference: RRP-HOOD-LATCH-XXX 4 colors to choose from
Blowsion surround and hull protection for arm jet. Pre-glued plastic material in 3M and black or chrome color Reference: 04-02-305, 04-02-304, 04-02-300
Riva Racing 'Pro-Bar' 4° handlebar for hand jet References: RY202BK-FAT
Riva Racing 'Pro-Bar' 0° handlebar for hand jet References: RY201BK-FAT
IDIARTEC start and stop switch Ref: CSS
RRP Reinforced Engine Mount for Yamaha Superjet Hand Jet Ref: RRP-MOT-MNT-BLU, RRP-MOT-MNT-BLK, RRP-MOT-MNT-RD, RRP-MOT-MNT-GN
RRP Black Front Bonnet Mount Ref: RKT-HD-FRK-BLK
Red front mountRRP for bonnet Ref: RKT-HD-FRK-RED
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Yamaha Jet Ski Retractable Cleats References: MWV-PUCLE-AT-07
High performance air filter from RIVA Racing for 2-stroke jet skis (all models and all brands) Reference: RY1301-1
DASA 89mm cylinder domes ranging from 37cc to 52cc Ref: WC-XXXX
Jet Works Pro Flow Control Valve for 3/8" ID Hose Reference: 52-3119
DASA 95mm cylinder domes ranging from 42cc to 50cc Ref: WC-XXXX
DASA 85mm cylinder domes ranging from 24cc to 34cc Ref: WC-XXXX
Rear wedge bump + 2.54cm ref. MISC-JT600
20% harder arm spring for Yamaha Superjet 96+ / FX1 and Rickter Ref: 58-5704
PROK Air Filter for 1 Jet Ski Carburetor ref. 006-585
Jettrim underhood protection for Yamaha Superjet 96 and above ref. YSJ121
Duckbill for Yamaha all models Ref: RY8100 Drains quickly mount in place of the original drain plugs. One-way check valve. Not recommended for use with a jetski stored in the water permanently.
Blowsion arm spring for Yamaha Superjet 96+ Ref: 03-04-012
DASA Cylinder Head O-Ring Kit for 89-95mm Cylinder in 5 Port Ref: WC-7003
Water injector for RRP exhaust system Reference: RRP-WTR-INJ
13mm (1/2") Hood Gasket for Arm Jet ref. TS55
Rear corner foot block from hydroturf in 2 inches or 5.08cm for arm jet Reference: KICK03
EVA BLOC 100mm x 120mm x 130mm with rounded corners for carbon exhausts. Reference: RRP-CRB-PIPE
Yamaha cover storage bag ref. MWVWVRNRBG01
3M neoprene glue spray 500ml ref. C3MNEOSPR500ML
DASA base gasket for 89 to 95mm cylinder in 5 port Ref: DL-003B
DASA base gasket for 85 to 86.5mm cylinder in 7 port Ref: DL-004
DASA cylinder head O-ring kit for 85 to 86.5mm cylinder in 7 port Ref: WC-7004
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
Rear wedge from JETTRIM for arm jet +2" or +5.04cm Reference: MISC-KICKER2
Bostik Agosolvent thinner, solvent for neoprene nitrile PU acrylic glue for Origine carpets, Hydroturf, Jettrim ... Sold in 1L jar Reference: BOKM511310
Instant disassembly connection for garden hose Ref: SC-2900
Rear footrest 5.08cm ref. KICK02
TAU CETI TORNADO AIR FILTER COVER Ref: PF-TCP-25
RRP coupler spacer Reference: CPL-SPC
DASA Segment Kit for DASA Pistons from 85mm to 95mm Ref: 3347KC, 3367KA, 3385KA, 3405KD, 3504TD, 3524TD, 3544TD, 3564KD, 3584KD, 3701KD, 3740KD
2 inch or 5.08cm PAD from Hydroturf for Yamaha Superjet arm jet Reference: TS422
Pre-filter for RY1301-1 high performance air filter from RIVA Racing Reference: RY1301PF-B
Quick turn adapter on rick roy steering nozzle for yamaha sj 96 + Ref: QU-ST-YAM Quick Turn Roy for Yamaha steering nozzle, mounts on the original steering nozzle and allows you to adjust the steering angle to your liking so that the machine turns shorter
Empty ball shim from BNJ for Yamaha jet skis all models Reference: BNJDRAIN