Subcategories
DASA 85mm cylinder kit with original crankshaft at +10mm Ref: WC-XXXX
DASA 89mm cylinder kit with original crankshaft at +16mm Ref: WC-XXXX
DASA 94mm cylinder kit with original crankshaft at +16mm Ref: WC-XXXX
Riva stage 1 performance kit for Yamaha Superjet hand jets from 2008 to 2020 Reference: RY-RPM-SJ-08
RRP High Performance Exhaust Kit for Yamaha Hand Jet, Superjet 701 model Reference: RRP-CRB-PIPE
Complete Magnum Pump SOLAS Impeller for Yamaha Superjet 144mm ref. YQS-PM-144/74T
FACTORY PIPE Type B exhaust for Yamaha Superjet LIMITED from 1996 and + Ref: FIN701SJ03
RRP aluminum arm machined from mass and lightened. V2 version with a new arm base for Yamaha Super jet, Rickter and Kawasaki SXR arm jet and aftermarket hull. Reference: HP-LITE-V2-BLK/BLK
RRP NINJA Complete Adjustable Footpeg Kit for Yamaha Superjet Ref: RRP-AB-SYST-NINJA
DASA cylinder head kit with girdle for 85mm cylinder Ref: YA7001G
RRP carbon flow guard for Yamaha 155mm ref. FL-GD-NIN1-CB-155
TUBBIE Destroyers Blowsion Front Sponsons for Yamaha SuperJet Hand Jets 2008 and up As well as the 2021 and up Superjet TR-1 Reference: 02-01-012 or 02-01-16
RIVA / SOLAS 12-Vein Stainless Steel Flow Straightener with Large Water Outlet for Engine Cooling for Yamaha 700cc Reference: YRS-SV-148/74
RRP carbon flow guard for Yamaha 144mm ref. FL-GD-NIN1-CB-144
Against Flux stainless steel 12 veins in diameter 144mm with hub of 75mm. "Magnum pump" effect while being 3 times cheaper and keeping the original transmission shaft. Fits either with a Solas YQ-CD propeller Cone included but sold without turbine bearings ref. YQS-SV-144/74
DASA cylinder head kit without girdle for 85mm jet ski cylinder Reference: YA7001
TBM Signature Series Fairing Plate for Yamaha Superjet 08+ ref. TBM123-Y08
Jettrim Carpet Kit for Yamaha Superjet TR-1 Hand Jet Reference: YSJ- 2021-A
Exhaust elbow for Factory type B pot ref. COMCST0040
RRP fiber flow guard for Yamaha 155mm ref. FL-GD-NIN1-F-BLK-155
DASA piston kit from 85mm to 95mm Ref: WC-XXXX
Solas stainless steel propeller body 144mm for Yamaha GP 800 (98-00), XL 800 (98-99), GP 760 (97-00), Wave raider 760 (96), Wave Radier 700 (94-97), Wave deluxe 700 (94-97), Wave Venture 700 (94-97), Wave Blaster 700 (93-97), Wave Runner 700 (93-97), VXR Pro 700 (93-97), Superjet 700 (94-16) Reference: YBS-HS-144
148mm stainless steel propeller body for mounting with the 148mm Solas stator Reference: YRS-HS-148
Hydroturf HT PREMIUM floor mat kit for Yamaha Superjet hand jet from 1996 to 2020 and + Ref. : AZ-HT751 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Worx Racing Freeride hull plate for Yamaha jetskis, Superjet model from 2008 to 2020 Reference: WR314
Complete decoration kit from RIVOT Racing for Yamaha Superjet hand jet before 2020 and predominantly fluorescent in color Reference: KDYSF
Deluxe Universal Bilge Pump Kit for Jet Skis, from RIVA Racing Reference: RY1016D
Hydroturf mat PRO SERIES version for Yamaha Superjet 2T hand jet from 1996 to 2020 Reference: PR751 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Blowsion TUBBIES I front sponsons for Yamaha Superjet 700 & Kawasaki SXR 800 jet skis Reference: 02-01-002
High performance air filter kit from RIVA Racing for Yamaha Superjet 2-stroke hand jets from 1990 to 2020 and Yamaha Waveblaster jet skis from 1994 to 1997 Reference: RY1301-KIT-1
Sponsors before TUBBIES II RACE ref. 02-01-003
TUBBIES III Front Sponsons ref. 02-01-004
Rick Roy Complete Steering Box 22mm Handlebar (2 Colors to Choose) ref. STR-SYST-UNIV-KIT-BLK (black) ref. STR-SYST-UNIV-KIT-SLV (aluminum)
DASA 94mm cylinder liners in 3 versions: Stock stroke 5 port, Stroker 5 port and +16mm Stroker 5 port Ref: WC-1XXX
Jettrim 3 Piece Carpet for Yamaha Superjet 96 and up Freestyle Arm Jet ref. YSJ126
T2 Race Fairing Plate for Yamaha Superjet 2008 and up Ref: PW-03-305-T2-HFC The T2 Race HFC plate by Pro Watercraft Racing is the latest generation of high-performance plates, born in Havasu, the jet-ski capital of the US. This one is perfect in the curves, it provides more stability in a straight line, and a pronounced engagement in the curves. Which...
DASA 85mm cylinder liners in 3 versions: Stock stroke 7 port, Stroker 7 port and Stock Stroke 5 port Ref: WC-1XXX
DASA 89mm cylinder liners in 2 versions: Stock stroke 5 port and +16mm Stroker 5 port Ref: WC-1811-XX
Jettrim 3-piece carpet for Yamaha Superjet 96 and + arm jet (unmodified original hull) ref. YSJ102
For Yamaha 2-stroke: YB-CD-13/17, YB-CD-14/18, YB-CD-15/19, YB-CD-16/20, YF-CD-11/14, YF-CD-13 /19, YF-CD-14/20, YB-SC-I (14.5-18), YB-SC-J (14.7-18.5), YB-SC-K (15-19), YB-SC-X (15-18), YB-SC-XI (16-19), YD-CD-12/18, YD-CD-13/19, YD -CD-14/20, Y D-SC-X0 (14.5-17.5), YG-CD-18/22, YF-CD-12/18, YD-SC-XI (15.5-18.5), YG-DF-15/22, YD-SC-X (13-16), YD-SC-I...
IDIARTEC sand filter Ref: IDT-FAS Marine grade aluminum filter housing machined from solid with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Supplied with straight and elbow brass fittings.
Worx Racing Freeride hull plate for Yamaha jet skis, Superjet 700 model from 2008 to 2020 Reference: WR312
WORX YAMAHA SJ/BLASTER 90-07 SHOVEL CAP Ref: WR201
Complete decoration kit from RIVOT Racing for Yamaha Superjet hand jet before 2020 and mainly in Red and Blue. Reference: KDYSRB
Complete decoration kit from RIVOT Racing for Yamaha Superjet hand jet before 2020 and predominantly red in color Reference: KDYSR
Complete decoration kit from RIVOT Racing for Yamaha Superjet hand jet before 2020 and mainly Orange in color Reference: KDYSO
High Performance fairing plate from RIVA Racing for Yamaha brand hand jet, Superjet model 2-stroke version in 700cc from 2008 to 2020 Reference: RY21011
RRP Carbon Tube, available in 20" and 26" ref. CB-TUBE-2X Sold individually
Pump Shoe aluminum 155mm Rick Roy Reference: PM-SH-AL-155 This part is made of lightweight aluminum from RRP. It fits Rickter, Superjet, Blaster and any other hull using a 155mm Yamaha pump. It can be rebored to 160mm and +
WORX SUPERJET SHOVEL SCOOPER AFTER 2008 Ref: WR228
3 Fuel Can Holders for Jet Ski Reference: 52-4911
RRP water box for Yamaha jet skis, Superjet 700 model from 1996 to 2020 Reference: RRP-OE-WTR-BOX-V2
Professional lifting tool for 1, 2, 3 seater jet skis and SUVs up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
WORX SJ/BLASTER SHOVEL SCOOPER AFTER 08 Ref: WR205
Supports for 2 fuel cans for jet ski Reference: 52-4910
DASA reinforced and cut in the mass DASA crankcase plate for Yamaha 700cc Ref: CP-7001
Worx Racing sponsons for Yamaha jet skis, Superjet 700 model from 1990 to 2020 Reference: WR544
Blowsion surround and hull protection for arm jet. Pre-glued 3M plastic material and black color, length of 7.6 meters Reference: 04-02-307
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm