Special glue for hydroturf carpet / Jettrim

- Marine Liquid Neoprene Glue specially designed for jet skis. For Hydroturf, Jet Traction, Gator Grip or Ap Design brand carpets.
Allows gluing even for free ride jets with full bodywork.
125ml tube or 1000ml pot.

Preparation of supports

The surfaces to be bonded must be clean, dry, dust-free and degreased.
Metals must be deoxidized and degreased.
On very smooth surfaces (especially rubbers), it is recommended to sand followed by stripping to promote adhesion.
Do not stick on cold materials (minimum +15°C).

Instructions for use

Apply using a brush or notched spatula.
Apply an even layer of glue to each side to be joined. On very porous materials, it is recommended to apply two layers of glue (allow to dry for at least one hour before applying the second layer).
Allow the solvents to evaporate until the glue no longer sticks to your fingers (approximately 15 to 20 minutes).
Bring the glued surfaces into contact and then apply strong pressure for a few seconds (15 to 20 seconds minimum) to ensure perfect contact between the two layers of glue. The bond is immediate and does not require readjustment.
Optimal strength is achieved after approximately 72 hours.
Given the diversity of materials to be bonded and working methods, the use of our products is recommended after testing or compatibility tests. Any use not in accordance with our recommendations or warnings will release us from liability.