Subcategories
Propellers for all Kawasaki 2-stroke 750cc jet-skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 800cc jet skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 900cc jet skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 1100cc jet skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki jet skis: KG-CD-13/19, KG-CD-14/20, KG-CD-14/21, KG-CD-15/21, KR-CD-14/21, KR-CD-15/22, KX-CD-10/16, KX-CD-16/21, KX-CD-15/23, KX-CD-16/24, KG-CD-16/22, KGX-CD-15/20, KGX-CD-12/16, KG-CD-11/17, KG-CD-12/18 (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke jet skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 1200cc jet skis: the correspondence table at the bottom of the page)
Trim cable from Skat trak for Kawasaki SXR 800 & SX-R 1500 arm jet Reference : - PRSTKAWSXRT for original trim - PRSTKAWSXRTP for Skat trak trim
Hydroturf seat cover for Kawasaki jet ski: - Ultra LX 160 from 2007 to 2008 - Ultra 250 from 2007 to 2008 - Ultra 260X from 2009 to 2013 - Ultra 300X from 2011 to 2014 - Ultra 310X from 2014 and + Reference: SEW62
BLOWSION STEERING BOX WITHOUT PLATE FOR STANDARD HANDLEBAR Ref: 03-05-001
Wiseco piston 83mm (8.4:1) for Kawasaki Ultra 260 Ref: 40048M08300 Bore 83mm | Ratio 8.4:1 Supplied with segments, clips and axle.
Hydroturf seat cover, HT premier model for Kawasaki jet ski: - Ultra LX 160 from 2009 and + - Ultra 250LX - Ultra 260LX - Ultra 300LX - Ultra 310LX Reference: AZ-SEW62C
Fuel pump adaptable for Kawasaki 1500cc jet ski References: RR220100230
Blowsion PWE fuel pump support for Kawasaki jet skis, SXR 1500 / SXR 160 model Reference: 1500-SXR-FPB-R001
WORX Scoop Scoop for Kawasaki SX or X2 650cc Ref: WR202
IDIARTEC column adapter for Kawasaki Ultra 150 jet-ski REF: ACK-150
Compressor pulley for Ultra 300 / 310 REF: PU-300X
Reinforced compressor pulley + IDIARTEC bearing for Kawasaki Ultra 250 and 260 jet skis REF: PU-250/260
TBM Turbine Cone for Kawasaki Ultra 250 / 260 / 300 / 310 ref. TBM120-UL
Kit consisting of 1 Wössner forged piston for Kawasaki STX 12F jet ski Reference: KPWKU12F
Hydroturf seat cover for Kawasaki Ultra 150 / 130 Di jet ski Reference: SEW61
Supports for 2 fuel cans for jet ski Reference: 52-4910
Sided coupler IDIARTEC reinforced motor for Kawasaki Ultra 250/260 jet-ski REF: CMK-260
Speed Magic Exhaust Cyclone for Kawasaki Ultra 250/260/300/310 ref. : SE-098066
Hydroturf seat cover for Kawasaki ZXI 1100 jet ski from 1998 to 2003 Reference: SEW601
Hydroturf mat for Kawasaki STX 12F / STX 15F / STX 1100 / STX 1200 jet ski from 2000 to 2019 ref. HT64 All Hydroturf products are custom-made and individually manufactured. They require a minimum manufacturing time of 15 business days. They cannot be returned or exchanged.
IDIARTEC reinforced transmission coupler for Kawasaki Ultra 250/260 jet-ski REF: CDK-260
IDIARTEC reinforced transmission coupler for Kawasaki SXR 1500 and STX 15F jet-ski REF: CDK-SXR1500/15F
RIVA Air Filter Kit for Kawasaki 15F / 12F / Ultra LX 160 / SX-R 1500 Jet Ski Reference: RK13085-KIT-1
Hydroturf seat cover for Kawasaki jet ski: - 900 STS from 2001 to 2002 - 900 STX from 1999 to 2000 - 1100 STX from 1997 Reference: SEW631
QUICK VACUUM SHIM KIT ALL STAND UP. WITH ALUMINUM OUTLET Ref: 06-01-022
Wiseco piston 83mm (8.4:1) for Kawasaki Ultra 260 Ref: 40048M08300 Bore 83mm | Ratio 8.4:1 Supplied with segments, clips and axle.
Side Jettrim protection with wedge for Kawasaki SXR 800 arm jet ref. KSXR106-A
Kawi Performance brand spring tensioner upgrade kit for Kawasaki jet skis, Ultra 300 & 310 models from 2011 to 2024 Reference: 30300-5025A
Blowsion surround and hull protection for arm jet. Pre-glued 3M plastic material and black color, length of 7.6 meters Reference: 04-02-307
TBM Thru-hull reinforcement for Kawasaki jet ski 550, 650, 750, 800cc, STX 15F, 15F and ultra 250 / 260 / 300 / 310 Ref: TBM141
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
COMETIC Reinforced Cylinder Head Gasket for Kawasaki Available in 84 or 85mm Ref. C6222-84 or C6222-85
Wössner Forged Piston Kit 82.93mm (10.6:1) for Kawasaki STX-15F / SX-R 1500 / Ultra 160 / STX 160 Jetski ref.: KPWK15F
Kit consisting of 1 Wössner forged piston for Kawasaki Ultra 250 and 260 jet ski Ref.: KPWKU250/260
Maptuner HDMI recording cable from RIVA Racing for Yamaha, Kawasaki jet ski Reference: 01-MT061
PROX piston kit (piston + segments + pin + circlips) for Kawasaki Ultra 300 ref. 01.4561.X
Riva Mirror Removal Kit for Kawasaki Ultra LX 160 / 250 / 260 / 300 / 310 Ref: RK5-U250X-MB
Kit consisting of 1 Wössner forged piston for Kawasaki Ultra 300 and 310 jet ski Reference: K6510DA
PROX piston kit (piston + segments + pin + circlips) for Kawasaki STX 15F, SXR 1500, STX 160 and Ultra LX 160 jet ski ref. 01.4554.A ref. 01.4554.B ref. 01.4554.C
PROX piston kit (piston + segments + pin + circlips) for Kawasaki Ultra 260 jet ski ref. 01.4559.A ref. 01.4559.B ref. 01.4559.C
Hydroturf Carpet for Kawasaki STS/ STX900 (99-00) /1100 (97-99) Jet Ski Ref. HT631 All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf mat for Kawasaki ZXI jet ski ref. HT60 All Hydroturf Products are made to measure and individually. They require a minimum production time of 15 working days. They will not be taken back or exchanged.
Hydroturf mat for Kawasaki SX-R 1500 hand jet from 2017 ref. HT681 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf Mat for Kawasaki SX-R 1500 hand jet from 2017 and above With 2 Rear Shims ref. HT681K All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Girdle kit for ADA cylinder head on Kawasaki 900 / 1100 Ref: KA1100G
Hydroturf mat for Kawasaki JS300/ JS400/ JS550 jet ski ref. HT20 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf carpet for Kawasaki 750 XI / XIR / SS jet ski ref. HT66 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf mat for Kawasaki X2 800 07-08 jet ski ref. HT41 All Hydroturf Products are made to measure and individually. They require a minimum production time of 15 working days. They will not be taken back or exchanged.
Hydroturf Carpet for Kawasaki X2 650 Jet Ski ref. HT40 All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf Mat for Kawasaki Ultra Jet Ski - Ultra LX 160 until 2022 - 250 X & 250 LX - 260 X & 260 LX - 300 X & 300 LX - 310 X & 310 LX up to 2021 Reference: HT62 All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf mat for Kawasaki Ultra 130/150 jet-ski ref. HT61 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf mat for Kawasaki 800SXR hand jet with Blowsion footrest +1" ref. HT68RC All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf Mat for Kawasaki SXR 800 Hand Jet ref. HT68 All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf carpet for Kawasaki ST, STS, 750 STX and 900 STX jet skis (before 1999) ref. HT63 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.