Subcategories
- For 4-stroke Seadoo watercraft with a 1494 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
COVERCRAFT TRANSPORT COVER for Seadoo watercraft Reference: COVERCRAFT-S
IDIARTEC Fixed or Cushioned Column for Sea-doo jet-ski in Aluminum or Black version depending on the size Reference: IDT-CSRXP/RXT Seadoo RXP / RXT column
Supports for 2 fuel cans for jet ski Reference: 52-4910
WORX RACING Free Exhaust for Seadoo 4 tec watercraft before 2016 (except GTX from 2002-03) Ref: WR04027
3M pre-glued Hydroturf mat for Seadoo RXT 260 IS & AS (09-16), GTX S 155 & 260 (12-16), GTX ltd IS (09-17) watercraft ref. HT882-PSA All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
3M pre-glued Hydroturf mat for Seadoo RXT 260 and RXT-X 260 (10-16), Wake 215 (10-15), GTX 155 and 215 (12-15) watercraft (except S models) ref. HT885-PSA All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
COMETIC Reinforced Head Gasket for Seadoo 1500 Available in 101, 102 or 103mm Ref. C6223-101, C6223-102 or C6223-103
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
LISLE . ENGINE ALIGNMENT TOOL . ASSEMBLY ALIGN SUPPORT PLATE KIT . ( sea-doo all model )
IControl lever from RIVA RACING for Seadoo watercraft equipped with an IBR ref. : RS24090-ICL
Cylinder Protection Block from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc watercraft all models ref. : SD-12025
Hydroturf Mat for Seadoo GTX 155 Watercraft, GTX Ltd. 215, 230, 300, RXT 260, Wake Pro (16-17) ref. HT886 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Exhaust spacer from AQUA SPORT for Seadoo 4 tec 1503cc watercraft Reference: SD-16001B
EASY RIDER Titanium Intake Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4247
Screw-in duckbill set for Seadoo from 2009 and up (sold in pairs) Ref: A7027
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
70 degree celsius thermostat from WORX Racing for Seadoo 4 Tec 1503cc watercraft Ref: WR04037
EASY RIDER Lightweight Racing Exhaust Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4215
Accelerator cable from EASY RIDER for Seadoo 300 watercraft Ref: RS-7300
ODI reinforced handlebar for saddle jet Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
EASY RIDER Lightweight Racing Intake Valve for Seadoo 4-stroke Watercraft all models. Ref: RS-4211
Crankshaft Connector from EASY RIDER for Seadoo 300 watercraft with 1730cc engine Ref: RS-4391
Lightened Timing Chain Sprocket from EASY RIDER for Seadoo 4-stroke watercraft Ref: RS-4221
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
ENGINE ALIGNMENT SHAFT for Seadoo watercraft all models except spark and IS or AS Reference: 950-140
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
IDIARTEC start and stop switch Ref: CSS
Valve seal kit from EASY RIDER for Seadoo 4-stroke watercraft Reference: RS-4220
Reinforced Turbine Seal from RIVA Racing for 4-hole Seadoo watercraft from 2004 and more Reference: RS23140
Ring for Esay Rider Directional Nozzle in diameter 88 exterior & 81 interior Ref. : RS-4981
Column extension for Seadoo H25, H50, H70, H100, H130 and H200 Reference: ES-25, ES-50, ES-70, ES-100, ES-130 and ES-200
High pressure oil pump shaft for open loop from EASY RIDER Ref: RS-4507
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Duckbill for Seadoo S3 from 2009 and above Ref: RS81090 Quick fit drains in the location of the original drain plugs. One-way non-return valve . Not recommended for use with a jetski stored in water permanently.
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
Screw-on duckbill for Seadoo from 2009 and above (sold individually) Ref: A7026
Exhaust Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-1
Handlebar extension for Seadoo all models except Spark ref. : RS24100-BES
VersiPlug ball bilge drain for Seadoo from 2009 and before, Honda, Polaris and Yamaha from 2004 and +, aluminum or black color ref. PD1401, PD1400 Plastic ball system allows you to empty the hold during navigation and prevent water from entering when the jet ski remains static, using water pressure. Sold individually.
Intake Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-2
VersiPlug ball bilge drain for Seadoo from 2010 and up, aluminum or black color ref. PD1420, PD1421 Plastic ball system allows the bilge to be emptied during navigation and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
3M neoprene glue spray 500ml ref. C3MNEOSPR500ML
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
Diluent, solvent Bostik Agosolvent for neoprene nitrile PU acrylic glue for Origine carpets, Hydroturf, Jettrim ... Sold in 1L jar Reference: BOKM511310
Instant disassembly connection for garden hose Ref: SC-2900
WSM Adapter for Engine Alignment Tool for Seadoo 185 & 215 Watercraft Ref. : 950-150
Alignment Tool Adapter from WSM for Seadoo 580 / 720 / 951 watercraft from 1992 to 2003 Ref. : 950-145 OEM: 529035590
Stainless steel towing ring for saddle jet ski
PAD (Protective Foam) for Handlebars with RIVA Racing Reinforcement Ref: PAD01-235
21mm Reinforced Screw, from EASY RIDER for All Seadoo 4-stroke Flywheels Reference: RS-4320
23mm Reinforced Screw, from EASY RIDER for racing flywheel, mounts on Seadoo 4-stroke watercraft Reference: RS-4321
Skat Trak Super Slim Line propeller rubber for SEADOO ref. RIMPNOSEBOOTSDSSL
Steering Cable Extension (+2cm) from EASY RIDER for Magnum Pump Set-Back Easy Rider Ref. : RS-4927