Subcategories
RRP aluminum arm machined from mass and lightened. V2 version with a new arm base for Yamaha Super jet, Rickter and Kawasaki SXR arm jet and aftermarket hull. Reference: HP-LITE-V2-BLK/BLK
+70 Rideplate Fairing Plate for SXR for Kawasaki SXR 800 Ref: W2-RP Looking for a race plate with the most radical turning, but still very stable in formed water - then the answer is the new W2 race plate. No other plate on the market will let the SX-R800 turn so sharply and remain totally stable and fast in a straight line. The V end of the plate also...
ADA Racing Cylinder Head for Kawasaki 1100 (Available in two colors, this kit is sold without girdle) Ref: KA900/1100-SLV Ref: KA900/1100-BLK
Kommander cylinder head for Kawasaki 1100 / 1200 (with girdle kit + gasket + water outlet elbow) ref. KOM-110-GZXI
Propellers for all Kawasaki 2-stroke 750cc jet-skis: (see the correspondence table at the bottom of the page)
Sponsors before TUBBIES II RACE ref. 02-01-003
TUBBIES III Front Sponsons ref. 02-01-004
ADA Racing Cylinder Head for Kawasaki 1100 (Available in two colors, this kit is sold with girdle) Ref: KA1100M-SLV Ref: KA1100M-BLK
Rick Roy Complete Steering Box 22mm Handlebar (2 Colors to Choose) ref. STR-SYST-UNIV-KIT-BLK (black) ref. STR-SYST-UNIV-KIT-SLV (aluminum)
Jettrim mat 4 pieces for Kawasaki SXR 800 hand jet ref. KSXR1112
T2 racing fairing plate for kawasaki SXR 800 arm jet Reference: PW-01-300-T2-HFC
V-FORCE 3 valve box for Kawasaki brand jet-ski Reference: 360353 and 360233
Propellers for all Kawasaki 2-stroke 800cc jet skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 900cc jet skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 1100cc jet skis: (see the correspondence table at the bottom of the page)
KOMMANDER exhaust kit for Kawasaki 1100 SXR hand jet ref. KOM-135-ZXI
Propellers for all Kawasaki 2-stroke jet skis: (see the correspondence table at the bottom of the page)
IDIARTEC sand filter Ref: IDT-FAS Marine grade aluminum filter housing machined from solid with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Supplied with straight and elbow brass fittings.
Propellers for all Kawasaki 2-stroke 1200cc jet skis: the correspondence table at the bottom of the page)
RRP Carbon Tube, available in 20" and 26" ref. CB-TUBE-2X Sold individually
3 Fuel Can Holders for Jet Ski Reference: 52-4911
Professional lifting tool for 1, 2, 3 seater jet skis and SUVs up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
COVERCRAFT TRANSPORT COVER for KAWASAKI jet ski Reference: COVERCRAFT-K
Supports for 2 fuel cans for jet ski Reference: 52-4910
Side Jettrim protection with wedge for Kawasaki SXR 800 arm jet ref. KSXR106-A
Blowsion surround and hull protection for arm jet. Pre-glued 3M plastic material and black color, length of 7.6 meters Reference: 04-02-307
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
Hydroturf Mat for Kawasaki SXR 800 Hand Jet ref. HT68 All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf mat for Kawasaki 800SXR hand jet with Blowsion footrest +1" ref. HT68RC All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Girdle kit for ADA cylinder head on Kawasaki 900 / 1100 Ref: KA1100G
Jettrim side protection for Kawasaki SXR 800 jet-ski ref. KSXR106
Black anodized TBM exhaust outlet for Kawasaki SXR 800 jet ski ref. TBM110
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Jettrim central mat for Kawasaki SXR 800 hand jet ref. KSXR101-C
Blowsion Aluminum Fuel Cap for Kawasaki SX / SXR 800 / SXR 1500 / 12F & 15F Arm Jet Ref: 04-03-10X 04-03-101: Black 04-03-102: Blue 04-03-104: Green 04-03-105: Orange 04-03-107: Red 04-03-108: Aluminum 04-03-109: Yellow
ADA Racing Hood Hooks for Kawasaki SXR-800 and SX-R 1500 Hand Jets Ref: 31-660200
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
Steering stop pad support for Rick Roy aluminum arm (4 colors to choose from) Ref: ST-STOP-UNIV-BLK (black) Ref: ST-STOP-UNIV-RD (red) Ref: ST-STOP-UNIV-GN (green) Ref: ST-STOP-UNIV-BLU (blue)
RACING VALVE BOYESEN FIBER KAWASAKI Reference: BOY-KAWA
Blowsion surround and hull protection for arm jet. Pre-glued plastic material in 3M and black or chrome color Reference: 04-02-305, 04-02-304, 04-02-300
IDIARTEC start and stop switch Ref: CSS
ON/OFF switch with circuit breaker for Kawasaki ref. AZ1030NG
ADA domes 82mm from 22cc to 32cc for Kawasaki 900 / 1100
High performance air filter from RIVA Racing for 2-stroke jet skis (all models and all brands) Reference: RY1301-1
BLOWSION ARM SPRING FOR KAWASAKI 800 SXR / 750 SXI Ref: 03-04-003
Rear wedge bump + 2.54cm ref. MISC-JT600
PROK Air Filter for 1 Jet Ski Carburetor ref. 006-585
Jettrim underhood protection for Kawasaki SXR 800 hand jet ref. KSXR109
Domes for Kommander cylinder head 82mm and 85mm in 24cc to 34cc ref. KOM-822400-ZXI (82mm/24cc)ref. KOM-822600-ZXI (82mm/26cc)ref. KOM-822800-ZXI (82mm/28cc)ref. KOM-823000-ZXI (82mm/30cc)ref. KOM-823200-ZXI (82mm/32cc)ref. KOM-852400-ZXI (85mm/24cc)ref. KOM-85 2600-ZXI ( 85mm/26cc)ref. KOM-85 2800-ZXI ( 85mm/28cc)ref. KOM-8530 00-ZXI ( 85mm/30cc)
Duckbill and bracket kit for Kawasaki Ref: 57-4065 / A4026 / 48020001
VersiPlug ball shim plug for Kawasaki all models, aluminum or black color ref. PD1301, PD1300 Plastic ball system allows the bilge to be emptied during navigation and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
13mm (1/2") Hood Gasket for Arm Jet ref. TS55
Rear corner foot block from hydroturf in 2 inches or 5.08cm for arm jet Reference: KICK03
3M neoprene glue spray 500ml ref. C3MNEOSPR500ML
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
Carburetor bracket for Kawasaki JS550 jet ski manifold spacer Reference: WCW-550-CARB-BRKT
Rear wedge from JETTRIM for arm jet +2" or +5.04cm Reference: MISC-KICKER2
Bostik Agosolvent thinner, solvent for neoprene nitrile PU acrylic glue for Origine carpets, Hydroturf, Jettrim ... Sold in 1L jar Reference: BOKM511310
Pre-filter for RY1301-1 high performance air filter from RIVA Racing Reference: RY1301PF-B