Subcategories
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
Wiseco 86mm (8.6:1) Piston for Yamaha 1.8L from 2009 to 2012 Ref: 40049M08600 Bore 86mm | Ratio 8.6:1 Supplied with segments, clips and axle.
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
RIVA free exhaust for Yamaha GP1800, VXR and VXS 1.8L jet skis Ref: RY16060
WORX Racing Compressor Rebuild Kit for Yamaha 1800 Compressed Jet Ski (SHO, FZR, FZS, SVHO) Ref: WR04051
Box + electronic trigger on the Left side (Brake) with Trim, from IDIARTEC for Yamaha VXR / VXS jet ski Reference: BGG-VXR
IDIARTEC sand filter Ref: IDT-FAS Marine grade aluminum filter housing machined from solid with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Supplied with straight and elbow brass fittings.
3-piece Jettrim mat for Yamaha VXR/VXS hand jet ref. YVXR102
Propellers for all Yamaha 4-stroke 1800cc jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Riva O2 sensor mounting kit for Yamaha 1.8L 2012+ Ref: RY15040-TP-O2
IDIARTEC reinforced steering axle for Yamaha GP1800 and VXR / VXS jet-skis from 2016 and up Reference: ADY-GP1800
3 Fuel Can Holders for Jet Ski Reference: 52-4911
Professional lifting tool for 1, 2, 3 seater jet skis and SUVs up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
High Performance Valve Guides from RIVA racing for Yamaha 1.8L jet ski Reference: RY19040-PVG-KIT
Reinforced Column from the IDIARTEC brand for Jet ski from the Yamaha brand VXR models References: CYVXR-XXX
87MM CYLINDER HEAD GASKET FOR YAMAHA FX-SHO/FZR/FZS Ref: RY10040-CHG-87
Riva 86mm Reinforced Cylinder Head Gasket for Yamaha 1.8L Ref: RY10040-CHG-86
RIVA VALVE LIFTING TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
Right side electronic trigger (accelerator) from IDIARTEC for Yamaha VXR / VXS jet ski Reference: GD-VXR
Supports for 2 fuel cans for jet ski Reference: 52-4910
88mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688B
Worx Cooling Kit for Yamaha 1.8L Ref: WR04032 Our new Yamaha engine block cooling plate allows up to 3 fittings to be fitted for maximum water flow. Targeted injection points and directs initial cooling around the #2 cylinder which is known for detonation and overheating in high performance applications. This anodized part allows 1, 2 or 3 fittings to be...
RIVA Racing Engine Breather Kit for Yamaha 1800 jet skis from 2012 and up Reference: RY19040-BCC
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
RIVA Racing Intake Manifold Ring Kit for Yamaha SVHO Jet Ski (18+) Ref: RY12080-IMUK
COMETIC Reinforced Cylinder Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
Racing Water Pump Strainer Kit from RIVA for Yamaha 1800 jet ski from 2014 to 2019 Reference: RY1013-WS-80
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
Paper workshop manual for Yamaha VXR, VXS & VX HO 1.8 jet skis from 2015 and up Reference: LIT-18616-03-63
Turbine Wedge Inclined by 2° from WORX Racing for Yamaha 1800 jet-ski Ref: WR05004
High performance air filter from Riva Racing in original format for Yamaha HO / SHO / SVHO jet skis References: RY13040-OE-2
Turbine shim + 2 degrees from RIVA Racing for Yamaha jet ski Reference: RY23040-PW
Side shim for Yamaha 1.8L ref. RY10040-TB-OIB125
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Worx fuel pressure regulator for Yamaha 1.8L Ref: WR04025 Increases fuel pressure 10psi Effective alternative to external fuel regulator Ideal for low boost / aftermarket ECU applications
WSM Air Filter (Replacement for OEM) for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS Replacing the original 6S5-E4451-00-00 ref. 006-590
HOT CAMS 7.48mm 4-stroke Yamaha jet ski VALVE PAD KIT Reference: HCSHIM01
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 30" (76cm) Ref: RY205BK-BAR-2
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 29" (73cm) Available in Black Anodized or Aluminum Ref: RY203BK-BAR-2 or RY203SI-BAR-2
86mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688
WORX Racing Reinforced Throttle Body Bracket for Yamaha 1800 Jet Ski Ref.: WR04047
Reinforced Engine Mount from RHAAS Products for Yamaha jet skis all 4-stroke models Ref: YAM4STRMOUNT
Riva Reinforced Shirt for Yamaha 1.8L Ref: RY10040-SLV-615
IDIARTEC start and stop switch Ref: CSS
Riva anti-cavitation kit for Yamaha GP1800 & VX 110, VX Limited, VXR, VXS, VX HO 1.8 jet skis from 2015 and up Reference: RY25110-1
RIVA Racing high volume fuel pump only for Yamaha 1800cc from 2008 to 2024 Reference: RY12040-340FP
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Riva Valve Seal Kit (16) for Yamaha 1.8L Ref: RY19040-PVS
Yamaha Jet Ski Retractable Cleats References: MWV-PUCLE-AT-07
Riva transmission shaft passage hose replacement aluminum tube kit for Yamaha VXR / VXS / GP 1800 jet-ski Ref: RY30060-DSS
Handle extension kit from RIVA Racing for Yamaha jet skis from 2015 and more Reference: RY24061-BES-3
Blue or Red anodized screw kit from RIVA Racing for the engine cover of your Yamaha 1.8 jet ski, all models. Reference: RY19040-KS
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Duckbill for Seadoo watercraft (before 2009) and Yamaha 1.8L jet ski Reference: RS8100 or A2025
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
Engine Anode Cooling Adapter from RIVA Racing for Yamaha 1.8L jet ski Reference: RY10080-EACA
RIVA Racing red or blue anodized oil cap for Yamaha 1.8 jet skis, all models. Reference: RY19040-OC
RIVA Racing cover plate for the original Yamaha Ride throttle body of your jet ski Reference: RY24110-SC
RIVA Intake Manifold Ring for Yamaha 1.8L naturally aspirated jetskis from 2008 and up Ref: RY12055-IMUK