Subcategories
Discharge Kit from WORX Racing for compressed Yamaha jet ski Ref: WR04021
Direct Admission Kit from WORX Racing for Yamaha 1800 Compressed Jet Ski (SHO, SVHO, FZR, FZS, GP1800) Ref. : WR04020
Tialsport Q-series blow-off valve kit from RIVA Racing in 50mm / 8 PSI for Yamaha and Seadoo jet skis equipped with a compressor. Reference: 002588
Hydroturf seat cover for Yamaha jet ski FX SHO from 2008 to 2011 Reference: SEWFX1
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
Riva valve lift tool for Yamaha 1.8L and Kawasaki 1.5L Ref: RY19040-VCT
Pressure regulator kit from the RIVA RACING brand in 24.9psi for jet ski from Yamaha model SHO and SVHO from 2011 and more Reference: RY11740-MS-4
RIVA RACING Engine Cooling Upgrade Kit for Yamaha SVHO Jet Ski Ref: RY10041-ECUK-PC-2
Compressor Rebuild Kit from WORX Racing for Yamaha 1800 Compressed jet ski (SHO, FZR, FZS, SVHO) Ref: WR04051
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Large Volume Fuel Pump Kit (340 L/H) RIVA Racing for Jetski Yamaha1800 Ref: RY12040-340FP-KIT
High Flow Injection Rail from RIVA Racing for Yamaha 1800 jet ski all models Reference: RY12040-BFR
Adaptable compressor bearing kit from WSM for Yamaha 1800 jet-ski from 2011 to 2021 Reference: 010-131K
WORX shovel scoop for Yamaha HO / SHO (08-11) ref. WR232
Propellers for all Yamaha 4-stroke 1800cc jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Universal discharge valve for jet ski, from the HKS brand, model Super SQV4 Reference: 71008-AK001
Riva O2 sensor mounting kit for Yamaha 1.8L 2012+ Ref: RY15040-TP-O2
Main casing screw kit for Yamaha 1.8L Ref: RY10840-CMSK-1LB
RIVA Free Exhaust for Yamaha FX SHO 2008-11 / FZR / FZS / FZ SVHO ref. RY16040
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
Reinforced cylinder head gasket 86mm Riva for Yamaha 1.8L Ref: RY10040-CHG-86
HEAD GASKET 87 MM FOR YAMAHA FX-SHO/FZR/FZS Ref: RY10040-CHG-87
3 Fuel Can Holders for Jet Ski Reference: 52-4911
EXHAUST OUTPUT ONLY FOR KIT RY15050 RIVA YAMAHA FX SHO/FZR/FZS Ref: RY15050-ET
High Performance Valve Guides from RIVA racing for Yamaha 1.8L jet ski Reference: RY19040-PVG-KIT
Professional lifting tool for hand jets and jet skis 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
WSM adaptable compressor bearing for Yamaha 1800 jet skis from 2011 to 2021 Reference: 010-131
Worx cooling kit for Yamaha 1.8L Ref: WR04032 Our new Yamaha engine block cooling plate allows up to 3 fittings to be fitted for maximum water flow. Targeted injection points and directs initial cooling around the No. 2 cylinder which is known for detonation and overheating in high performance applications. This anodized part allows 1,2 or 3 fittings to...
Wiseco piston 86mm (8.6:1) for Yamaha 1.8L from 2009 to 2012 Ref: 40049M08600 Bore 86mm | Ratio 8.6:1 Comes with segments, clips and axle.
Anti-Cavitation Turbine Cone from WORX Racing for Yamaha SHO jet-ski Ref: WR06008
RIVA VALVE LIFT TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
Reinforced compressor bearing from RIVA Racing for Yamaha SVHO / FZR / FZS / SHO jet ski Ref: RY17040-HDSCB-6S5
IDIARTEC Reinforced Column for Jet-ski Yamaha FX 160 / HO / SHO / SVHO / FZR / FZS Reference: CY17, CY-45, CY-100, CY-160, CY-230, CYA-160, CYA-195 and CYA-230
Supports for 2 fuel cans for jet ski Reference: 52-4910
3 bar (29.7 PSI) pressure regulator housing from RIVA Racing for Yamaha SHO and FZR / FZS jet skis from 2008 to 2010 Ref: RY11740-MS-3
IDIARTEC reinforced engine mount for Sea-Doo RXT / RXP 260 Ref: IDT-SMRXT
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
3 bar (29.7 PSI) pressure regulator housing from RIVA Racing for Yamaha SHO jet skis 2011 to 2016, SVHO from 2018 to 2019, GP1800R 2019 and + Ref: RY11740-MS-3
Turbine wedge + 2 degrees from RIVA Racing for Yamaha jet ski Reference: RY23040-PW
WSM Air Filter (Replacement for OEM) for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS Replacing the original 6S5-E4451-00-00 ref. 006-590
88mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688B
Worx WR232 Anti-Cavitation Kit for Yamaha FX HO and SHO Jet Skis from 2008 to 2011 Ref: WR0702
High performance air filter, from Riva Racing brand in original format for Yamaha HO / SHO / SVHO jet skis References: RY13040-OE-2
Turbine Wedge Inclined by 2° from WORX Racing for Yamaha 1800 jet-ski Ref: WR05004
YAMAHA WATERPROOF SWITCH Ref: 57-3017
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Worx fuel pressure regulator for Yamaha 1.8L Ref: WR04025 Increases fuel pressure 10psi Effective alternative to external fuel regulator Ideal for low boost / aftermarket ECU applications
HOT CAMS 7.48mm 4-stroke Yamaha jet ski VALVE PAD KIT Reference: HCSHIM01
COMETIC Reinforced Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
Side wedge for Yamaha 1.8L ref. RY10040-TB-OIB125
Water filter for pump from RIVA Racing for Yamaha jet ski, model: - FX 140 from 2004 to 2006 - FX 160 from 2005 to 2008 - FX HO from 2008 to 20019 - FX SHO from 2008 to 2019 Reference: RY1013-WS-40
ODI reinforced handlebar for saddle jet Reference: 06013082
Reinforced Throttle Body Support from WORX Racing for Yamaha 1800 jet ski Ref. : WR04047
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
86mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688
Riva reinforced liner for Yamaha 1.8L Ref: RY10040-SLV-615