No products
Rickter RRP
-
Jet ski accessories
- Seadoo Accessories
- Jet ski anchors
- Audio
- Jet-ski covers
- Gasoline transport container
- Arm for jet to arm
- Foot rests
- Column & Platinum
- Commodo
- Circuit breaker
- Jet ski fenders
- Re-embarkation scale
- Distress flares
- Jet ski trigger
- Jet-ski handlebar
- Saddle covers
- Jet Ski Graphic Kit
- Peach
- Jet ski grips
- Floating pontoons
- Storage (bag, bin ...)
- Jet-ski safety
- License stickers
- Hydroturf / Jettrim mat
- Buoy to tow
- Jet pilot equipment
-
Jet ski maintenance
- Jet-ski starting aid
- Engine additives
- Jet ski batteries
- NGK candles
- Fuels
- Jet ski compressor
- Jet-ski degreaser
- Hoses and accessories
- Electric jet ski
- Jet-ski hull maintenance
- Water evacuation
- Air filter
- Oil filter
- Oil filter
- Marine grease
- Wintering
- Engine oil
- Turbine oil
- Protective lubricant
- Jet ski cleaning
- Jet-ski tools
- Joint paste
- Hull / engine paint
- Cooling
- Revision (full pack)
- Rinsing (tips)
- Workshop services
- Fuel stabilizer
- Thermostats
- Flyboard / Flyride
- Kawasaki jet ski
- Seadoo jet-ski
- Yamaha jet ski
- JetSurf
- JetXtender
- Jet-ski & Trailer Rental
- Jet-ski occasions
-
Jet ski adaptable parts
- Jet ski cables
- Carburation / injection
- Shell
- Electric jet ski
-
Jet ski engine
- camshaft
- balancing shaft
- Connecting rod in kit
- needle cages, pin and circlips
- Crankcase
- distribution chain
- cylinder liner
- Compressor
- Pads
- cylinder head
- cylinders
- exhaust hose
- Exchanger / Intercooler
- jet ski oil filter
- 2-stroke seals
- 4-stroke seals
- SBT Complete Engine
- jet ski piston
- oil pump
- piston rings
- valves
- jet-ski engine mount
- Thermostat
- valves
- jet-ski crankshaft
- jet-ski engine bolts
- Jet ski tools
- Jet ski propulsion
- Trim VTS
- Original jet-ski parts
- Jet-ski racing parts
- Underwater Thruster
- Jet ski trailers
- Wakeboard / Paddle / Water Toys
- Destocking
vehiculier
Rickter RRP
Subcategories
-
1 499,95€ Delivery within 2 to 10 daysRRP Billet Light V2 Arm Yamaha / Kawasaki
RRP aluminum arm machined from mass and lightened. V2 version with a new arm base for Yamaha Super jet, Rickter and Kawasaki SXR arm jet and aftermarket hull. Reference: HP-LITE-V2-BLK/BLK
1 499,95€Delivery within 2 to 10 days -
1 299,95€ Delivery within 2 to 10 days
TRIM kit RRP 155mm
Complete 155mm aluminum Trim kit from Rick Roy. Sold complete with cable and handle. For Freeride and Freestyle use Reference: RRP-TRIM-155
1 299,95€Delivery within 2 to 10 days -
1 199,95€ Delivery within 2 to 10 days
RRP Trim Kit 144mm
Complete 144mm aluminum Trim kit from Rick Roy. Sold complete with cable and handle. For Freeride and Freestyle use Reference: RRP-TRIM-144
1 199,95€Delivery within 2 to 10 days -
1 099,95€ Delivery within 2 to 10 days
Ninja 1 Carbon Shovel Scoop
Ninja 1 Full carbon shovel scoop Reference: INT-GR-NIN1-CB
1 099,95€Delivery within 2 to 10 days -
1 099,95€ Delivery within 2 to 10 days
Ninja 2 shovel bailer in carbon
Shovel scoop Ninja 2 Full carbon Reference: INT-GR-NIN2-CB
1 099,95€Delivery within 2 to 10 days -
699,95€ Delivery within 2 to 10 days
RRP carbon flow guard for Yamaha 155mm
RRP carbon flow guard for Yamaha 155mm ref. FL-GD-NIN1-CB-155
699,95€Delivery within 2 to 10 days -
639,95€ Delivery within 2 to 10 days
Tubbie Destryer Blowsion Front Sponsors...
Tubbie Destryer Blowsion Front Sponsons for Rickter Hand Jet ref. 02-01-008 and 02-01-009
639,95€Delivery within 2 to 10 days -
609,95€ Delivery within 30 days
Rick roy Ninja Full Carbon upper arm
Rick Roy Upper Arm (Chin Pad) Ninja Full Carbon ref. NINJA-COM-PAD
609,95€Delivery within 30 days -
599,95€ Delivery within 2 to 10 days
RRP carbon flow guard for Yamaha 144mm
RRP carbon flow guard for Yamaha 144mm ref. FL-GD-NIN1-CB-144
599,95€Delivery within 2 to 10 days -
569,95€ Delivery within 2 to 10 days
RRP electrical compartment box
Black plastic box electrical compartment RRP for arm jet Reference: RRP-AL-EL-BOX-BLK
569,95€Delivery within 2 to 10 days -
499,95€ Delivery within 2 to 10 days
Pair of RRP fiber and adjustable dale-feet
Pair of RRP fiber and adjustable dale-feet Reference: AB-BINDING
499,95€Delivery within 2 to 10 days -
439,95€ Delivery within 2 to 10 days
RRP fiber flow guard for Yamaha 155mm
RRP fiber flow guard for Yamaha 155mm ref. FL-GD-NIN1-F-BLK-155
439,95€Delivery within 2 to 10 days -
399,95€ Delivery within 2 to 10 days
Ricker aluminum shovel scoop (wing trim)
Ricker aluminum shovel scoop (wing trim) Reference: INT-GR-AL
399,95€Delivery within 2 to 10 days -
399,95€ Delivery within 2 to 10 days
Rickter FS-2 hull plate (short)
Rickter FS-2 small model carbon hull plate Ref: XFS-2-RD-PLT-S
399,95€Delivery within 2 to 10 days -
399,95€ Delivery within 2 to 10 days
Rickter FS-2 hull plate (medium)
Rickter FS-2 large model carbon hull plate Ref: XFS-2-RD-PLT-M
399,95€Delivery within 2 to 10 days -
314,96€ 349,95€ -10% In stock
Complete steering box diameter 22.2mm
Rick Roy Complete Steering Box 22mm Handlebar (2 Colors to Choose) ref. STR-SYST-UNIV-KIT-BLK (black) ref. STR-SYST-UNIV-KIT-SLV (aluminum)
314,96€ 349,95€ -10%Reduced price!In stock -
289,95€ Delivery within 2 to 10 days
Rickter Ninja Hood Air Intake Scoop
Rickter Ninja Hood Air Intake Scoop Reference: NJ-HOOD-SC
289,95€Delivery within 2 to 10 days -
269,95€ Delivery within 2 to 10 days
IDIARTEC solid-cut sand filter
IDIARTEC sand filter Ref: IDT-FAS Marine grade aluminum filter housing machined from solid with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Supplied with straight and elbow brass fittings.
269,95€Delivery within 2 to 10 days -
269,95€ Delivery within 2 to 10 days
-
259,95€ Delivery within 2 to 10 days
Pump Shoe 155mm RRP
Pump Shoe aluminum 155mm Rick Roy Reference: PM-SH-AL-155 This part is made of lightweight aluminum from RRP. It fits Rickter, Superjet, Blaster and any other hull using a 155mm Yamaha pump. It can be rebored to 160mm and +
259,95€Delivery within 2 to 10 days -
259,95€ Delivery within 2 to 10 days
RRP Carbon Tube in 20" and 26"
RRP Carbon Tube, available in 20" and 26" ref. CB-TUBE-2X Sold individually
259,95€Delivery within 2 to 10 days -
239,95€ Delivery within 2 to 10 days
-
209,95€ Delivery within 2 to 10 days
Adjustable plate for Rickter motor mount
RRP Black Adjustable Aluminum Plate for Rickter Engine Mount Ref: ADJ-ENG-PLT-BLK
209,95€Delivery within 2 to 10 days -
184,95€ Delivery within 2 to 10 days
Quick bilge vacuum kit for arm jet
QUICK VACUUM SHIM KIT ALL STAND UP. WITH ALUMINUM OUTLET Ref: 06-01-022
184,95€Delivery within 2 to 10 days -
175,95€ Delivery within 2 to 10 days
Black hull strake in 3M - 7.60M
Blowsion surround and hull protection for arm jet. Pre-glued 3M plastic material and black color, length of 7.6 meters Reference: 04-02-307
175,95€Delivery within 2 to 10 days -
171,95€ Delivery within 2 to 10 days
WATCON Tool for Re-pitching Propellers
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
171,95€Delivery within 2 to 10 days -
159,95€ Delivery within 2 to 10 days
RRP Trim Cable
RRP Replacement Trim Cable Reference: RRP-TRIM-CABLE
159,95€Delivery within 2 to 10 days -
144,95€ Delivery within 2 to 10 days
Pump Shoe 144mm RRP
Pump Shoe plastic 144mm Rick Roy Reference: PM-SH-PLAS-144 This part is made of lightweight plastic from RRP. It fits Rickter, Superjet, Blaster and any other hull using a 144mm Yamaha pump.
144,95€Delivery within 2 to 10 days -
139,95€ Delivery within 2 to 10 days
RRP Transmission Coupler for Yamaha
RRP transmission coupler for all Rickter and Yamaha except 66M/66E/66V Reference: RRP-EG-CPL
139,95€Delivery within 2 to 10 days -
134,95€ Delivery within 2 to 10 days
Double start/stop switch Idiartec (15-19)
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
134,95€Delivery within 2 to 10 days -
114,95€ Delivery within 2 to 10 days
Idiartec double start/stop switch (20+)
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
114,95€Delivery within 2 to 10 days -
104,95€ Delivery within 2 to 10 days
RRP bilge valve (sold individually)
Rick Roy bilge valve only (sold individually) ref. RRP-SCU-V
104,95€Delivery within 2 to 10 days -
99,95€ Delivery within 2 to 10 days
RRP electrical box cover
RRP electrical box cover Reference: RRP-AL-EL-BOX-CVR
99,95€Delivery within 2 to 10 days -
98,06€ 108,95€ -10% In stock
RRP Adjustable Hood Lock
Adjustable bonnet lock in anodised aluminium and machined from solid RRP Reference: RRP-HOOD-LATCH-XXX 4 colors to choose from
98,06€ 108,95€ -10%Reduced price!In stock -
96,95€ Delivery within 2 to 10 days
Blowsion surround and hull protection
Blowsion surround and hull protection for arm jet. Pre-glued plastic material in 3M and black or chrome color Reference: 04-02-305, 04-02-304, 04-02-300
96,95€Delivery within 2 to 10 days -
94,95€ Delivery within 2 to 10 days
Idiartec start and stop switch for jet ski
IDIARTEC start and stop switch Ref: CSS
94,95€Delivery within 2 to 10 days -
88,95€ Delivery within 2 to 10 days
RRP Reinforced Engine Mount for Superjet
RRP Reinforced Engine Mount for Yamaha Superjet Hand Jet Ref: RRP-MOT-MNT-BLU, RRP-MOT-MNT-BLK, RRP-MOT-MNT-RD, RRP-MOT-MNT-GN
88,95€Delivery within 2 to 10 days -
85,95€ Delivery within 2 to 10 days
Black front fixing for RRP bonnet
RRP Black Front Bonnet Mount Ref: RKT-HD-FRK-BLK
85,95€Delivery within 2 to 10 days -
85,95€ Delivery within 2 to 10 days
Red front fixing for RRP bonnet
Red front mountRRP for bonnet Ref: RKT-HD-FRK-RED
85,95€Delivery within 2 to 10 days -
84,95€ Delivery within 2 to 10 days
RIVA universal water filter
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
84,95€Delivery within 2 to 10 days -
79,95€ Delivery within 2 to 10 days
-
78,95€ Delivery within 2 to 10 days
RRP bonnet gasket for Rickter FS-1 and FS-2
RRP Hood Gasket for RICKTER FS-1 & FS-2 Reference: RRP-HD-SCL
78,95€Delivery within 2 to 10 days -
70,95€ Delivery within 1 to 3 weeks
Rear wedge bump + 2.54cm
Rear wedge bump + 2.54cm ref. MISC-JT600
70,95€Delivery within 1 to 3 weeks -
69,95€ Delivery within 2 to 10 days
Mikuni high volume fuel pump
Mikuni large volume fuel pump for 2T engines prepared and equipped with large carburettor. Max flow: 61L/hour Ref. DF62-702 / 53-3328
69,95€Delivery within 2 to 10 days -
66,45€ 69,95€ -5% In stock
Reinforced arm spring for Superjet 96+
20% harder arm spring for Yamaha Superjet 96+ / FX1 and Rickter Ref: 58-5704
66,45€ 69,95€ -5%Reduced price!In stock -
63,95€ Delivery within 2 to 10 days
PROK air filter for 1 carburetor
PROK Air Filter for 1 Jet Ski Carburetor ref. 006-585
63,95€Delivery within 2 to 10 days -
57,95€ Delivery within 2 to 10 days
RRP 65mm exhaust coupler
RRP 65mm Exhaust Coupler Reference: RRP-EX-CPL-WB
57,95€Delivery within 2 to 10 days -
53,06€ 58,95€ -10% In stock
Dark Aluminum Spacer for Arm Support Axle
Dark Grey Anodized Aluminum Spacer for Rick Roy Cast Arm Support Axle Ref: AL-BP-SPC
53,06€ 58,95€ -10%Reduced price!In stock -
49,95€ Delivery within 2 to 10 days
RRP Water Injector
Water injector for RRP exhaust system Reference: RRP-WTR-INJ
49,95€Delivery within 2 to 10 days -
48,95€ Delivery within 1 to 3 weeks
13mm Hydroturf Hood Seal for Arm Jet
13mm (1/2") Hood Gasket for Arm Jet ref. TS55
48,95€Delivery within 1 to 3 weeks -
48,95€ Delivery within 1 to 3 weeks
2" hydroturf rear corner foot block
Rear corner foot block from hydroturf in 2 inches or 5.08cm for arm jet Reference: KICK03
48,95€Delivery within 1 to 3 weeks -
47,95€ Delivery within 2 to 10 days
RRP Exhaust Shim 100 x 120 x 130mm
EVA BLOC 100mm x 120mm x 130mm with rounded corners for carbon exhausts. Reference: RRP-CRB-PIPE
47,95€Delivery within 2 to 10 days -
44,95€ Delivery within 2 to 10 days
3M neoprene glue spray 500ml
3M neoprene glue spray 500ml ref. C3MNEOSPR500ML
44,95€Delivery within 2 to 10 days -
40,95€ Delivery within 1 to 3 weeks
Hydroturf lateral foot block 61cm x 6.5cm
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
40,95€Delivery within 1 to 3 weeks -
40,95€ Delivery within 1 to 3 weeks
JETTRIM rear shim + 5.08cm (+2")
Rear wedge from JETTRIM for arm jet +2" or +5.04cm Reference: MISC-KICKER2
40,95€Delivery within 1 to 3 weeks -
35,10€ 36,95€ -5% In stock
Dissolved Hydroturf Carpet Glue / Jettrim
Bostik Agosolvent thinner, solvent for neoprene nitrile PU acrylic glue for Origine carpets, Hydroturf, Jettrim ... Sold in 1L jar Reference: BOKM511310
35,10€ 36,95€ -5%Reduced price!In stock -
32,95€ Delivery within 1 to 3 weeks
Hydroturf rear footrest + 5.08cm
Rear footrest 5.08cm ref. KICK02
32,95€Delivery within 1 to 3 weeks -
32,95€ Delivery within 2 to 10 days
RRP coupler spacer + 2.5cm
RRP coupler spacer Reference: CPL-SPC
32,95€Delivery within 2 to 10 days -
31,95€ In stock
Stainless steel towing ring with arm jet
stainless steel towing ring for arm jet ref. QL-02
31,95€In stock -
31,95€ Delivery within 2 to 10 days
Replacement valve for RRP flapper
Replacement valve for RRP flapper (RRP-SCU-V) ref. RRP-SCU-V-FLAP
31,95€Delivery within 2 to 10 days
