Subcategories
RRP aluminum arm machined from mass and lightened. V2 version with a new arm base for Yamaha Super jet, Rickter and Kawasaki SXR arm jet and aftermarket hull. Reference: HP-LITE-V2-BLK/BLK
Rick Roy Upper Arm (Chin Pad) Ninja Full Carbon ref. NINJA-COM-PAD
Propellers for all Polaris jet skis: PA-CD-12/18, PA-CD-13/19, PA-CD-15/21, PB-SC-X (see the correspondence table at the bottom of the page)
Rick Roy Complete Steering Box 22mm Handlebar (2 Colors to Choose) ref. STR-SYST-UNIV-KIT-BLK (black) ref. STR-SYST-UNIV-KIT-SLV (aluminum)
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
3 Fuel Can Holders for Jet Ski Reference: 52-4911
RRP Carbon Tube, available in 20" and 26" ref. CB-TUBE-2X Sold individually
Professional lifting tool for hand jets and jet skis 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
Supports for 2 fuel cans for jet ski Reference: 52-4910
ALL STAND UP QUICK VACUUM KIT. WITH ALUMINUM OUTLET Ref: 06-01-022
Blowsion surround and hull protection for arm jet. Pre-glued 3M plastic material and black color, length of 7.6 meters Reference: 04-02-307
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
Hydroturf mat for Polaris Octane jet ski ref. HT96 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and above Reference: CDS-20
Steering stop pad support for Rick Roy aluminum arm (4 colors to choose from) Ref: ST-STOP-UNIV-BLK (black) Ref: ST-STOP-UNIV-RD (red) Ref: ST-STOP-UNIV-GN (green) Ref: ST-STOP-UNIV-BLU (blue)
Blowsion surround and hull protection for arm jet. Pre-glued plastic material in 3M and black or chrome color Reference: 04-02-305, 04-02-304, 04-02-300
IDIARTEC start and stop switch Ref: CSS
ANTI ARM EXTENSION CORD ALL MODELS Ref: 03-04-151
TAU CETI TORNADO SERIES ROUND AIR FILTER THICK: 1.5'' BLACK Ref: 53-4271-BLK
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
High performance air filter from RIVA Racing for 2-stroke jet-skis (all models and all brands) Reference: RY1301-1
Rear wedge bump + 2.54cm ref. MISC-JT600
Mikuni large volume fuel pump for 2T engines prepared and equipped with large carburettor. Max flow: 61L/hour Ref. DF62-702 / 53-3328
PROK Air Filter for 1 Jet Ski Carburetor ref. 006-585
Liquid neoprene glue for Hydroturf carpets. Sold in 125ml tube or 1L pot References: BOKM502930 or BOKM502932
Dark Grey Anodized Aluminum Spacer for Rick Roy Cast Arm Support Axle Ref: AL-BP-SPC
Original type hood gasket for Yamaha Superjet, FX1, Blaster Polaris Octane ref. OCT-HS
13mm (1/2") Hood Gasket for Arm Jet ref. TS55
Rear corner foot block from hydroturf in 2 inches or 5.08cm for arm jet Reference: KICK03
3M neoprene glue spray 500ml ref. C3MNEOSPR500ML
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
Rear wedge from JETTRIM for arm jet +2" or +5.04cm Reference: MISC-KICKER2
Diluent, solvent Bostik Agosolvent for neoprene nitrile PU acrylic glue for Origine carpets, Hydroturf, Jettrim ... Sold in 1L jar Reference: BOKM511310
Pre-filter for RY1301-1 high performance air filter from RIVA Racing Reference: RY1301PF-B
Instant disassembly connection for garden hose Ref: SC-2900
stainless steel towing ring for arm jet ref. QL-02
Mikuni Additional Pump Reconditioning Kit ref. 53-3328RP
WSM Air Filter Adapter for Mikuni 38/40mm Carburetor Ref: 006-664
WSM or SBT adapter (depending on availability) for air filter for Mikuni 44 mm carburetor without oil injection Ref: 006-661
COVER FOR TAU CETI TORNADO AIR FILTER Ref: PF-TCP-25
Set of 4 anodized mass-size aluminum washers to replace the adjustable shim plate fixing washers. Ref: 04-04-01X
WSM or SBT adapter (depending on availability) for air filter for 38 mm Mikuni carburetor with oil injection Ref: 006-660-01
WSM or SBT adapter (depending on arrival) for air filter for Mikuni 57 mm carburettor for XLT, GP & GPR Ref: 006-667
WSM or SBT adapter (depending on arrival) for air filter for 44 mm Mikuni carburettor with oil injection Ref: 006-661-01
WSM air filter adapter for Mikuni 46mm carburetor Ref: 006-662
WSM or SBT adapter (depending on availability) for air filter for 38 mm Mikuni carburetor without oil injection Ref: 006-660
Lateral foot block 33x5cm ref. TS43
Tau ceti air filter cover (53-4275) size 4"X3" by 3.5" Ref: WR125-10-35DT
COVER FOR AIR FILTER TAU CETI ROUND EP:1,5'' Ref: PF-TCP-01
SOLAS Propeller Remover for Honda, Polaris & Tigershark ref. WR001 and WR006
WSM or SBT adaptable propeller remover (depending on availability) for original Yamaha, Kawasaki, Seadoo, Polaris, Tigershark jet ski propeller
H2O Water Protection Sock for PROK Air Filter ref. 006-580
Water evacuation drain kit for 2-stroke Seadoo, Polaris and Honda jet-skis Ref: A2265
SOLAS propeller tip for Honda, Polaris & Tigershark Reference: SLA010, SL012 and SL009 Reference no longer manufactured: SL006