Subcategories
CDI box MSD Enhancer Yamaha 701 ref. 4253
Exhaust elbow for Factory type B muffler ref. COMCST0040
Solas stainless steel propeller body 144mm for Yamaha GP 800 (98-00), XL 800 (98-99), GP 760 (97-00), Wave raider 760 (96), Wave Radier 700 (94-97), Wave deluxe 700 (94-97), Wave Venture 700 (94-97), Wave Blaster 700 (93-97), Wave Runner 700 (93-97), VXR Pro 700 (93-97), Superjet 700 (94- 16) Reference: YBS-HS-144
Turbine body from SOLAS by RIVA Racing in 155mm for Yamaha jet ski from 1994 to 1999 Reference: YDS-HS-155
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
For Yamaha 2-stroke: YB-CD-13/17, YB-CD-14/18, YB-CD-15/19, YB-CD-16/20, YF-CD-11/14, YF-CD-13 /19, YF-CD-14/20, YB-SC-I (14.5-18), YB-SC-J (14.7-18.5), YB-SC-K (15-19), YB-SC-X ( 15-18), YB-SC-XI (16-19), YD-CD-12/18, YD-CD-13/19, YD-CD-14/20, Y D-SC-X0 (14.5-17.5 ), YG-CD-18/22, YF-CD-12/18, YD-SC-XI (15.5-18.5), YG-DF-15/22, YD-SC-X (13-16), YD- SC-I...
Flywheel Cover from BLOWSION for Yamaha Superjet hand jet Reference: 01-03-36X
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
MSD IGNITION COIL FOR 2 CYLINDERS 2T ref. 4294
3 Fuel Can Holders for Jet Ski Reference: 52-4911
Professional lifting tool for hand jets and jet skis 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
Hydroturf seat cover for Yamaha Wave venture jet ski from 1997 to 1998 Reference: SEW781
Hydroturf seat cover for Yamaha WaveVenture jet-ski from 1994 to 1996 Reference: SEW78
PROX piston kit (piston + rings + pin + circlips) for Yamaha GP800R and 1200R jet ski with valve ref. 01.2518.X
Supports for 2 fuel cans for jet ski Reference: 52-4910
MSD ignition support for Yamaha Ref: 01-04-419
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
Hydroturf carpet for Yamaha Wave Venture / XL 700 (98-04) / XL 760 (98-04) and XL 1200 (98) jet ski ref. HT78 All Hydroturf Products are made to measure and individually. They require a minimum production time of 15 working days. They will not be taken back or exchanged.
YAMAHA WATERPROOF SWITCH Ref: 57-3017
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
PROX piston kit (piston + segments + pin + circlips) for Yamaha 700cc jet-ski ref. 01.2510.X
ODI reinforced handlebar for saddle jet Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
PROX piston kit (piston + segments + pin + circlips) for Yamaha 760cc and 1200 non-valved jet-ski ref. 01.2514.X
Bonnet attachment strap set ref. 920723812 / 920723815
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and above Reference: CDS-20
ADA TRANSMISSION COUPLER FOR YAMAHA 650/700/760 Ref: 34-700190
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Kit of 6 cylinder head studs from ADA Racing for Yamaha brand jet-ski Reference: YA701GA
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
BOYESEN YAM 701 (62T) VALVES Ref: 026
IDIARTEC start and stop switch Ref: CSS
Boyesen Yamaha 701 (61X) Fiber Valves ref. 024
TAU CETI TORNADO SERIES ROUND AIR FILTER THICK: 1.5'' BLACK Ref: 53-4271-BLK
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Retractable cleats for Yamaha jet skis References: MWV-PUCLE-AT-07
High performance air filter from RIVA Racing for 2-stroke jet-skis (all models and all brands) Reference: RY1301-1
Blowsion Aluminum Fuel Cap Blowsion for YAMAHA Ref: 04-03-15X
Mikuni large volume fuel pump for 2T engines prepared and equipped with large carburettor. Max flow: 61L/hour Ref. DF62-702 / 53-3328
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
NEKEN handlebar with reinforcement bar for saddle jet ref. 060129XX
PROK Air Filter for 1 Jet Ski Carburetor ref. 006-585
Duckbill for Yamaha all models Ref: RY8100 Drains quickly mount in place of the original drain plugs. One-way check valve. Not recommended for use with a jetski stored permanently in the water.
VersiPlug brand bilge emptyer for Yamaha Jet-ski from 1992 to 2003 as well as for Yamaha GPR from 2000 to 2006 References: PD1201
Pro-Series 2 cylinder head gasket kit from RIVA Racing for Yamaha brand jet-ski, 700cc model Reference: RY10026-O
Pro-Series 3 cylinder head gasket kit from RIVA Racing for Yamaha brand jetski, model 1100 & 1200 Reference: RY10028-O
Yamaha cover storage bag ref. MWVWVRNRBG01
ADA O-RING KIT FOR YAMAHA 701/760 CYLINDER HEAD Ref: ORKIT-YA701M
Empty ball shim from Blowsion for Yamaha all models (aluminum or black colors) Ref: 06-01-062 / 06-01-063 Automatic ball drain plug for YAMAHA Its plastic ball system allows the bilge to be emptied during navigation and to be closed when the jet remains static, using water pressure.
3M neoprene glue spray 500ml ref. C3MNEOSPR500ML
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
Star Bar Booster Handlebar for Saddle Jet ref. SB-BOOSTXL-XXX