Subcategories
Kommander cylinder head for Kawasaki 1100 / 1200 (with girdle kit + gasket + water outlet elbow) ref. KOM-110-GZXI
Propellers for all Kawasaki 2-stroke 1100cc jet skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 900cc jet skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 800cc jet skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 750cc jet-skis: (see the correspondence table at the bottom of the page)
ADA racing cylinder head with interchangeable domes (not supplied) for Kawasaki Ultra 150 ref. KU150
WORX brand Sponson Racing kit for Kawasaki Ultra 130/150 jet ski Ref: WR519
Propellers for all Kawasaki 2-stroke 1200cc jet skis: the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke jet skis: (see the correspondence table at the bottom of the page)
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
3 Fuel Can Holders for Jet Ski Reference: 52-4911
WORX Racing shovel scoop for Kawasaki Ultra 130 / 150 jet ski Ref: WR215
Professional lifting tool for hand jets and jet skis 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
COVERCRAFT TRANSPORT COVER for KAWASAKI jet ski Reference: COVERCRAFT-K
IDIARTEC column adapter for Kawasaki Ultra 150 jet-ski REF: ACK-150
Hydroturf seat cover for Kawasaki Ultra 150 / 130 Di jet ski Reference: SEW61
Supports for 2 fuel cans for jet ski Reference: 52-4910
TBM Thru-hull reinforcement for Kawasaki jet ski 550, 650, 750, 800cc, STX 15F, 15F and ultra 250 / 260 / 300 / 310 Ref: TBM141
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
Hydroturf mat for Kawasaki Ultra 130/150 jet-ski ref. HT61 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
ODI reinforced handlebar for saddle jet Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Blowsion Aluminum Fuel Cap for Kawasaki SX / SXR 800 / SXR 1500 / 12F & 15F Arm Jet Ref: 04-03-10X 04-03-101: Black 04-03-102: Blue 04-03-104: Green 04-03-105: Orange 04-03-107: Red 04-03-108: Aluminum 04-03-109: Yellow
Bonnet attachment strap set ref. 920723812 / 920723815
Kawasaki ON/OFF switch Under the comodo
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and above Reference: CDS-20
RACING VALVE BOYESEN FIBER KAWASAKI Reference: BOY-KAWA
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
WSM adaptable coupler extractor for Kawasaki Ultra 150 jet ski (sold individually) original ref.: 57001-1423 adaptable ref.: 003-310
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
IDIARTEC start and stop switch Ref: CSS
ON/OFF switch with circuit breaker for Kawasaki ref. AZ1030NG
TAU CETI TORNADO SERIES ROUND AIR FILTER THICK: 1.5'' BLACK Ref: 53-4271-BLK
Column wedge for Kawasaki (+25mm or +50mm) Reference: IDT-CKXX
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
High performance air filter from RIVA Racing for 2-stroke jet-skis (all models and all brands) Reference: RY1301-1
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
NEKEN handlebar with reinforcement bar for saddle jet ref. 060129XX
Domes for 82mm and 85mm Kommander cylinder heads in 24cc to 34cc ref. KOM-822400-ZXI (82mm/24cc)ref. KOM-822600-ZXI (82mm/26cc)ref. KOM-822800-ZXI (82mm/28cc)ref. KOM-823000-ZXI (82mm/30cc)ref. KOM-823200-ZXI (82mm/32cc)ref. KOM-852400-ZXI (85mm/24cc)ref. KOM-85 2600-ZXI (85mm /26cc)ref. KOM-85 2800-ZXI (85mm /28cc)ref. KOM-8530 00-ZXI (85mm /30cc)
PROK Air Filter for 1 Jet Ski Carburetor ref. 006-585
Duckbill and mounting kit for Kawasaki Ref: 57-4065 / A4026 / 48020001
ADA racing cylinder head dome 42cc (+20lbs / 91 octane) for Kawasaki Ultra 150 and STX-R ref. KU1542
ADA racing 32cc cylinder head dome (+70lbs / 112 octane) for Kawasaki Ultra 150 and STX-R ref. KU1532
ADA racing 36cc cylinder head dome (+50lbs / 105 octane) for Kawasaki Ultra 150 and STX-R ref. KU1536
ADA racing 38cc cylinder head dome (+40lbs / 105 octane) for Kawasaki Ultra 150 and STX-R ref. KU1538
ADA racing 40cc cylinder head dome (+30lbs / 98 octane) for Kawasaki Ultra 150 and STX-R ref. KU1540
ADA racing 44cc cylinder head dome (+10lbs / 91 octane) for Kawasaki Ultra 150 and STX-R ref. KU1544
VersiPlug ball shim plug for Kawasaki all models, aluminum or black color ref. PD1301, PD1300 Plastic ball system allows the bilge to be emptied during navigation and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
3M neoprene glue spray 500ml ref. C3MNEOSPR500ML
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
Star Bar Booster Handlebar for Saddle Jet ref. SB-BOOSTXL-XXX