Complete Turbine Magnum pump SOLAS in 12 veins for jet ski Kawasaki SXR 1500 Ref .: KGX-PM-148/74T
Magnum pump SOLAS in 12 veins for jet ski Kawasaki SXR 1500, STX 900, 1100, 12F, 15F and ZXI 1100 Ref .: KGX-HSV-148/74
ADA Racing Cylinder Head for Kawasaki 1100 (Available in two colors, this kit is sold without girdle) Ref: KA900/1100-SLV Ref: KA900/1100-BLK
Kommander cylinder head for Kawasaki 1100 / 1200 (with girdle kit + gasket + water outlet elbow) ref. KOM-110-GZXI
Propellers for all Kawasaki 2-stroke 750cc jet-skis: (see the correspondence table at the bottom of the page)
ADA Racing Cylinder Head for Kawasaki 1100 (Available in two colors, this kit is sold with girdle) Ref: KA1100M-SLV Ref: KA1100M-BLK
V-FORCE 3 valve box for Kawasaki brand jet-ski Reference: 360353 and 360233
Propellers for all Kawasaki 2-stroke 800cc jet skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 900cc jet skis: (see the correspondence table at the bottom of the page)
Propellers for all Kawasaki 2-stroke 1100cc jet skis: (see the correspondence table at the bottom of the page)
IDIARTEC sand filter Ref: IDT-FAS Marine grade aluminum filter housing machined from solid with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Supplied with straight and elbow brass fittings.
Propellers for all Kawasaki 2-stroke jet skis: (see the correspondence table at the bottom of the page)
1100SXR Exhaust Manifold ref. KOM-130-ZXI
Propellers for all Kawasaki 2-stroke 1200cc jet skis: the correspondence table at the bottom of the page)
MSD IGNITION COIL FOR 2 CYLINDERS 2T ref. 4294
V-Force 3 Carbon Reed Valve Kit for Kawasaki 2 Cylinders ref. V3150-794-2 New Carbon V-Force 3 reed valve , + acceleration, + speed, the best for intake. Sold in pairs
3 Fuel Can Holders for Jet Ski Reference: 52-4911
Professional lifting tool for 1, 2, 3 seater jet skis and SUVs up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
COVERCRAFT TRANSPORT COVER for KAWASAKI jet ski Reference: COVERCRAFT-K
Supports for 2 fuel cans for jet ski Reference: 52-4910
Hydroturf seat cover for Kawasaki ZXI 1100 jet ski from 1998 to 2003 Reference: SEW601
TBM Thru-hull reinforcement for Kawasaki jet ski 550, 650, 750, 800cc, STX 15F, 15F and ultra 250 / 260 / 300 / 310 Ref: TBM141
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
Girdle kit for ADA cylinder head on Kawasaki 900 / 1100 Ref: KA1100G
Hydroturf mat for Kawasaki ZXI jet ski ref. HT60 All Hydroturf Products are made to measure and individually. They require a minimum production time of 15 working days. They will not be taken back or exchanged.
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
ODI Reinforced Handlebar for Saddle Jet Reference: 06013082
Bonnet attachment strap set ref. 920723812 / 920723815
Kawasaki ON/OFF switch Under the comodo
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
RACING VALVE BOYESEN FIBER KAWASAKI Reference: BOY-KAWA
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
IDIARTEC start and stop switch Ref: CSS
ON/OFF switch with circuit breaker for Kawasaki ref. AZ1030NG
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
ADA domes 82mm from 22cc to 32cc for Kawasaki 900 / 1100
High performance air filter from RIVA Racing for 2-stroke jet skis (all models and all brands) Reference: RY1301-1
Flywheel puller for Kawasaki Ultra 150 ref. 003-318-01
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
PROK Air Filter for 1 Jet Ski Carburetor ref. 006-585
NEKEN handlebar with reinforcement bar for saddle jet ref. 060129XX
Domes for Kommander cylinder head 82mm and 85mm in 24cc to 34cc ref. KOM-822400-ZXI (82mm/24cc)ref. KOM-822600-ZXI (82mm/26cc)ref. KOM-822800-ZXI (82mm/28cc)ref. KOM-823000-ZXI (82mm/30cc)ref. KOM-823200-ZXI (82mm/32cc)ref. KOM-852400-ZXI (85mm/24cc)ref. KOM-85 2600-ZXI ( 85mm/26cc)ref. KOM-85 2800-ZXI ( 85mm/28cc)ref. KOM-8530 00-ZXI ( 85mm/30cc)
Duckbill and bracket kit for Kawasaki Ref: 57-4065 / A4026 / 48020001
VersiPlug ball shim plug for Kawasaki all models, aluminum or black color ref. PD1301, PD1300 Plastic ball system allows the bilge to be emptied during navigation and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
3M neoprene glue spray 500ml ref. C3MNEOSPR500ML
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
Carburetor bracket for Kawasaki JS550 jet ski manifold spacer Reference: WCW-550-CARB-BRKT
Bostik Agosolvent thinner, solvent for neoprene nitrile PU acrylic glue for Origine carpets, Hydroturf, Jettrim ... Sold in 1L jar Reference: BOKM511310
Pre-filter for RY1301-1 high performance air filter from RIVA Racing Reference: RY1301PF-B
Star Bar Booster Handlebar for Saddle Jet ref. SB-BOOSTXL-XXX