No products
HX
-
Jet ski accessories
- Seadoo Accessories
- Jet ski anchors
- Audio
- Jet-ski covers
- Gasoline transport container
- Arm for jet to arm
- Foot rests
- Column & Platinum
- Commodo
- Circuit breaker
- Jet ski fenders
- Re-embarkation scale
- Distress flares
- Jet ski trigger
- Jet-ski handlebar
- Saddle covers
- Jet Ski Graphic Kit
- Peach
- Jet ski grips
- Floating pontoons
- Storage (bag, bin ...)
- Jet-ski safety
- License stickers
- Hydroturf / Jettrim mat
- Buoy to tow
- Jet pilot equipment
-
Jet ski maintenance
- Jet-ski starting aid
- Engine additives
- Jet ski batteries
- NGK candles
- Fuels
- Jet ski compressor
- Jet-ski degreaser
- Hoses and accessories
- Electric jet ski
- Jet-ski hull maintenance
- Water evacuation
- Air filter
- Oil filter
- Oil filter
- Marine grease
- Wintering
- Engine oil
- Turbine oil
- Protective lubricant
- Jet ski cleaning
- Jet-ski tools
- Joint paste
- Hull / engine paint
- Cooling
- Revision (full pack)
- Rinsing (tips)
- Workshop services
- Fuel stabilizer
- Thermostats
- Flyboard / Flyride
- Kawasaki jet ski
- Seadoo jet-ski
- Yamaha jet ski
- JetSurf
- JetXtender
- Jet-ski & Trailer Rental
- Jet-ski occasions
-
Jet ski adaptable parts
- Jet ski cables
- Carburation / injection
- Shell
- Electric jet ski
-
Jet ski engine
- camshaft
- balancing shaft
- Connecting rod in kit
- needle cages, pin and circlips
- Crankcase
- distribution chain
- cylinder liner
- Compressor
- Pads
- cylinder head
- cylinders
- exhaust hose
- Exchanger / Intercooler
- jet ski oil filter
- 2-stroke seals
- 4-stroke seals
- SBT Complete Engine
- jet ski piston
- oil pump
- piston rings
- valves
- jet-ski engine mount
- Thermostat
- valves
- jet-ski crankshaft
- jet-ski engine bolts
- Jet ski tools
- Jet ski propulsion
- Trim VTS
- Original jet-ski parts
- Jet-ski racing parts
- Underwater Thruster
- Jet ski trailers
- Wakeboard / Paddle / Water Toys
- Destocking
vehiculier
HX
Subcategories
-
999,95€ Delivery within 2 to 10 daysSeadoo Genuine Lift Kit
BRP lifting kit for Seadoo watercraft all models ref. : 295100758
999,95€Delivery within 2 to 10 days -
379,95€ Delivery within 2 to 10 days
Complete engine alignment kit for Seadoo...
Complete engine alignment kit for all Seadoo watercraft models except Spark Reference: 80-103B
379,95€Delivery within 2 to 10 days -
335,95€ Delivery within 2 to 10 days
Engine alignment kit for Seadoo jet ski
Engine shaft alignment kit for Seadoo watercraft all models except Spark, IS and AS Reference: 950-140K
335,95€Delivery within 2 to 10 days -
273,66€ 321,95€ -15% In stock
SOLAS propeller for Seadoo 2T jet ski (951cc)
- For Seadoo 2-stroke watercraft for 951cc engine: (see the correspondence table at the bottom of the page)
273,66€ 321,95€ -15%Reduced price!In stock -
273,66€ 321,95€ -15% In stock
SOLAS propeller for Seadoo 2T jet ski (782cc)
- For Seadoo 2-stroke 782cc watercraft: (see the correspondence table at the bottom of the page)
273,66€ 321,95€ -15%Reduced price!In stock -
273,66€ 321,95€ -15% In stock
SOLAS propeller for Seadoo 2T jet ski (720cc)
- For Seadoo 2-stroke 720cc watercraft: (see the correspondence table at the bottom of the page)
273,66€ 321,95€ -15%Reduced price!In stock -
269,95€ Delivery within 2 to 10 days
IDIARTEC solid-cut sand filter
IDIARTEC sand filter Ref: IDT-FAS Marine grade aluminum filter housing machined from solid with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Supplied with straight and elbow brass fittings.
269,95€Delivery within 2 to 10 days -
269,95€ Delivery within 2 to 10 days
SOLAS propeller for Seadoo 2T jet ski (650cc)
- For Seadoo 2-stroke 650cc watercraft: (see the correspondence table at the bottom of the page)
269,95€Delivery within 2 to 10 days -
265,16€ 311,95€ -15% In stock
COVERCRAFT Seadoo Transport Cover
COVERCRAFT TRANSPORT COVER for Seadoo watercraft Reference: COVERCRAFT-S
265,16€ 311,95€ -15%Reduced price!In stock -
246,46€ 289,95€ -15% In stock
Holders for 3 fuel cans
3 Fuel Can Holders for Jet Ski Reference: 52-4911
246,46€ 289,95€ -15%Reduced price!In stock -
239,96€ 299,95€ -20% In stock
Professional Jet Ski Lifting Tool
Professional lifting tool for 1, 2, 3 seater jet skis and SUVs up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
239,96€ 299,95€ -20%Reduced price!In stock -
229,95€ Delivery within 2 to 10 days
Worx scoop for Seadoo GTI/GTS/GTX/HX (92-97)
Worx Racing scoop for Seadoo brand watercraft, GTI/GTS/GTX & HX models from 1992 to 1997 Reference: WR206
229,95€Delivery within 2 to 10 days -
199,95€ Delivery within 1 to 3 weeks
Hydroturf saddle cover for Seadoo HX
Hydroturf saddle cover for Seadoo HX jet ski Reference: SEW87
199,95€Delivery within 1 to 3 weeks -
199,95€ Delivery within 2 to 10 days
Supports for 2 fuel cans
Supports for 2 fuel cans for jet ski Reference: 52-4910
199,95€Delivery within 2 to 10 days -
177,95€ Delivery within 2 to 10 days
Jet ski engine alignment tool
LISLE . ENGINE ALIGNMENT TOOL . ASSEMBLY ALIGN SUPPORT PLATE KIT . ( sea-doo all model )
177,95€Delivery within 2 to 10 days -
171,95€ Delivery within 2 to 10 days
WATCON Tool for Re-pitching Propellers
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
171,95€Delivery within 2 to 10 days -
139,95€ Delivery within 2 to 10 days
SOLAS scoop for XP/ SP/ SPX/ SPI/ GS/ GSI/...
SOLAS shovel scoop for: - XP 782 (95-96) / XP 720 (95) / XP 650 (91-94) - SPX 782 (97-98) / SPX 720 (96-97) / SPX 650 (93-95) / SPI 650 (93-96) / SP 650 (88-96) - GS 720 (97) / GSI 720 (97-98) / GSX 650 (92-95) - GTI 720 (96-97) / GTS 720 (97-00) / GTX 650 (92-95) / GTS 650 (92-96) / GT 650 (90-91) - HX720 (95) Ref: SD-IG-B
139,95€Delivery within 2 to 10 days -
139,95€ Delivery within 2 to 10 days
NEKEN 28mm reinforced handlebar,...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
139,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
NEKEN 28mm Black and White Reinforced...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3334
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm USA
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3052
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Orange
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
NEKEN 28mm Reinforced Handlebar Black and...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
124,95€Delivery within 2 to 10 days -
124,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Yellow
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
124,95€Delivery within 2 to 10 days -
120,60€ 126,95€ -5% In stock
ODI Universal Reinforced Handlebar
ODI Reinforced Handlebar for Saddle Jet Reference: 06013082
120,60€ 126,95€ -5%Reduced price!In stock -
119,95€ Delivery within 2 to 10 days
Hood attachment strap set for jet-ski
Bonnet attachment strap set ref. 920723812 / 920723815
119,95€Delivery within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Turquoise...
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
109,95€Delivery within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm White
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
109,95€Delivery within 2 to 10 days -
109,95€ Delivery within 2 to 10 days
Reinforced handlebar NEKEN 28mm Blue
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
109,95€Delivery within 2 to 10 days -
104,95€ Delivery within 2 to 10 days
Jet ski engine alignment shaft
ENGINE ALIGNMENT SHAFT for Seadoo watercraft all models except spark and IS or AS Reference: 950-140
104,95€Delivery within 2 to 10 days -
94,95€ Delivery within 2 to 10 days
Idiartec start and stop switch for jet ski
IDIARTEC start and stop switch Ref: CSS
94,95€Delivery within 2 to 10 days -
84,95€ Delivery within 2 to 10 days
RIVA universal water filter
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
84,95€Delivery within 2 to 10 days -
80,06€ 88,95€ -10% In stock
Universal wheel extractor for 2-stroke jetski
Universal wheel puller for 2-stroke jet skis References: 003-322 / 80-104
80,06€ 88,95€ -10%Reduced price!In stock -
78,95€ Delivery within 2 to 10 days
RIVA high performance air filter for 2T
High performance air filter from RIVA Racing for 2-stroke jet skis (all models and all brands) Reference: RY1301-1
78,95€Delivery within 2 to 10 days -
69,95€ Delivery within 2 to 10 days
Mikuni high volume fuel pump
Mikuni large volume fuel pump for 2T engines prepared and equipped with large carburettor. Max flow: 61L/hour Ref. DF62-702 / 53-3328
69,95€Delivery within 2 to 10 days -
68,95€ Delivery within 2 to 10 days
RIVA hood attachment set for jet-ski
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
68,95€Delivery within 2 to 10 days -
65,95€ Delivery within 2 to 10 days
SD Duckbill before 2009 / Yam. 1.8/1.9L
Duckbill for Seadoo watercraft (before 2009) and Yamaha 1.8L jet ski Reference: RS8100 or A2025
65,95€Delivery within 2 to 10 days -
63,95€ Delivery within 2 to 10 days
PROK air filter for 1 carburetor
PROK Air Filter for 1 Jet Ski Carburetor ref. 006-585
63,95€Delivery within 2 to 10 days -
56,95€ Delivery within 2 to 10 days
NEKEN 22mm Handlebar with Reinforcement Bar
NEKEN handlebar with reinforcement bar for saddle jet ref. 060129XX
56,95€Delivery within 2 to 10 days -
49,95€ Delivery within 2 to 10 days
Factory exhaust hose 127x60mm
Factory pipe exhaust hose 127x60mm ref. COMHOS0110
49,95€Delivery within 2 to 10 days -
46,50€ 48,95€ -5% In stock
Bilge emptyer for Yam / Seadoo / Honda /...
VersiPlug ball bilge pump for Seadoo 2009 and earlier, Honda, Polaris and Yamaha 2004 and up, aluminum or black color ref. PD1401, PD1400 Plastic ball system allows the bilge to be emptied during navigation and prevents water from entering when the jet ski remains static, using water pressure. Sold individually.
46,50€ 48,95€ -5%Reduced price!In stock -
44,95€ Delivery within 2 to 10 days
3M neoprene glue spray 500ml
3M neoprene glue spray 500ml ref. C3MNEOSPR500ML
44,95€Delivery within 2 to 10 days -
44,60€ 46,95€ -5% In stock
Seadoo Jet Ski TORX Socket Set
Seadoo Female Torx Bit Set Ref: LS26750
44,60€ 46,95€ -5%Reduced price!In stock -
42,46€ 49,95€ -15% In stock
Riva 38mm Air Filter Adapter
Riva Racing brand air filter adapter in 38mm for RY1301 References: RY1338-1
42,46€ 49,95€ -15%Reduced price!In stock -
40,95€ Delivery within 1 to 3 weeks
Hydroturf lateral foot block 61cm x 6.5cm
Hydroturf side toe wedge to glue, 61cm long, 6.5cm wide and 2.5cm thick ref. TS44
40,95€Delivery within 1 to 3 weeks -
39,56€ 43,95€ -10% In stock
K&N Filter Protection Sock
K&N Air Filter Water Protection Sock (see table below)
39,56€ 43,95€ -10%Reduced price!In stock -
35,10€ 36,95€ -5% In stock
Dissolved Hydroturf Carpet Glue / Jettrim
Bostik Agosolvent thinner, solvent for neoprene nitrile PU acrylic glue for Origine carpets, Hydroturf, Jettrim ... Sold in 1L jar Reference: BOKM511310
35,10€ 36,95€ -5%Reduced price!In stock -
34,95€ Delivery within 2 to 10 days
Connection for flushing hoses
Instant disassembly connection for garden hose Ref: SC-2900
34,95€Delivery within 2 to 10 days -
32,95€ Delivery within 2 to 10 days
Seadoo 580/720/951 Alignment Tool Adapter
Alignment Tool Adapter from WSM for Seadoo 580 / 720 / 951 watercraft from 1992 to 2003 Ref. : 950-145 OEM: 529035590
32,95€Delivery within 2 to 10 days -
32,95€ Delivery within 2 to 10 days
TAU CETI air filter cover
TAU CETI TORNADO AIR FILTER COVER Ref: PF-TCP-25
32,95€Delivery within 2 to 10 days -
32,95€ Delivery within 2 to 10 days
Adapter for Seadoo Alignment Tool
WSM Adapter for Engine Alignment Tool for Seadoo 185 & 215 Watercraft Ref. : 950-150
32,95€Delivery within 2 to 10 days -
32,36€ 35,95€ -10% In stock
RIVA pre-filter for 2T engine air filter
Pre-filter for RY1301-1 high performance air filter from RIVA Racing Reference: RY1301PF-B
32,36€ 35,95€ -10%Reduced price!In stock -
30,95€ In stock
Stainless steel towing ring for saddle jet
Stainless steel towing ring for saddle jet ski
30,95€In stock -
30,95€ Delivery within 2 to 10 days
Kit recond. Addi pump. Mikuni
Mikuni Additional Pump Reconditioning Kit ref. 53-3328RP
30,95€Delivery within 2 to 10 days -
29,99€ 99,95€ -70% In stock
Star Bar Booster Handlebar for Saddle Jet
Star Bar Booster Handlebar for Saddle Jet ref. SB-BOOSTXL-XXX
29,99€ 99,95€ -70%Reduced price!In stock -
29,95€ Delivery within 2 to 10 days
Adapter for Mikuni 44mm carburetor
WSM or SBT adapter (depending on availability) for air filter for Mikuni 44 mm carburetor without oil injection Ref: 006-661
29,95€Delivery within 2 to 10 days -
29,66€ 32,95€ -10% In stock
-
27,95€ Delivery within 2 to 10 days
Round air filter cover EP: 1.5'
COVER FOR TAU CETI ROUND AIR FILTER THICKNESS:1.5'' Ref: PF-TCP-01
27,95€Delivery within 2 to 10 days -
26,95€ Delivery within 2 to 10 days
Adapter for Mikuni 38/40 mm carburetor
WSM Air Filter Adapter for Mikuni 38/40mm Carburetor Ref: 006-664
26,95€Delivery within 2 to 10 days -
26,95€ Delivery within 2 to 10 days
Adapter for Mikuni 38mm carburetor
WSM or SBT adapter (depending on availability) for air filter for 38 mm Mikuni carburetor without oil injection Ref: 006-660
26,95€Delivery within 2 to 10 days
