Subcategories
- For 4-stroke Seadoo watercraft with a 1494 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
- For Seadoo 4-stroke watercraft with a 1630 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Worx scoop for seadoo GTX 4-tec (02-05), GTX sc (03-04), RXT 215 (05-08) ref. WR221
Worx Starr / Stop ITC control switch for Seadoo 4 stroke Ref: WR06013
Worx brand IBR / ITC control switch for Seadoo 4 stroke Ref: WR06012
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
155mm turbine ring for seadoo 130 / 155 / 185 hp ref. RS33-155-SR
159mm impeller ring for seadoo 215 / 255 / 260 / 300 ref. RS33-159-SRX
WISECO piston for seadoo side 100.50mm ref. : 40038M10050
Riva Racing electronic throttle trigger for Seadoo jet ski ref. : RS2406010
EASY RIDER Reinforced Front Engine Mount for Seadoo 4-stroke watercraft Ref: RS-4262
EASY RIDER oil cooling for Seadoo watercraft from 2016 to 2019 Reference: RS-4516
WORX brand IBR control lever for Seadoo 4 stroke Ref: WR06011
WORX brand electronic accelerator lever for Seadoo 4 stroke Ref: WR06010
WORX Racing shovel scoop for seadoo watercraft from 2009 and above with an S3 hull ref. : WR235
Riva thermostat kit for seadoo RXT/GTX -SC/RXP Ref: RS1015
RIVA Racing reinforcement for Seadoo 215, 255, 260 and 300 watercraft intake manifold Reference: RS12050-IMG-1
WISECO piston for seadoo coast 101.00mm ref. : 40038M10100
Gasket Technology Top End Gasket Kit for SeaDoo 4 Tec 1500cc All Models Watercraft
Reinforced Turbine Shaft from EASY RIDER with propeller housing close to -2mm for Seadoo 4-stroke watercraft Ref: RS-4926
EASY RIDER oil cooling for Seadoo watercraft from 2010 to 2015 Reference: RS-4515
IBR Riva Racing Trigger for Seadoo Jet Ski ref.: RS2406011
RIVA VALVE LIFT TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
PRO-SERIES cylinder head gasket from Riva Racing for Seadoo 1500cc watercraft from 2005 to 2017 Reference: RS10050-CHG-1503
Ring set for 130mm Forged Piston for 1730cc engine from EASY RIDER for Seadoo Watercraft Sold individually and for the RS-3056 piston kit Reference: RS-3057
Ring set for Forged Piston 103mm (102.93mm) for 1730cc engine from EASY RIDER for Seadoo Watercraft Sold individually and for the RS-3056 piston kit Reference: RS-3060
Original Seadoo bilge pump kit for Sea-doo watercraft - RXT / GTX / Wake Pro from 2018 and above - Fish Pro from 2019 and up - GTI / GTI SE / GTR from 2020 and more - RXP-X from 2021 and up Reference: 295100739
IDIARTEC Fixed or Cushioned Column for Sea-doo jet-ski in Aluminum or Black version depending on the size Reference: IDT-CSRXP/RXT Seadoo RXP / RXT column
Stainless steel wear ring 159mm Solas for seadoo 215 / 255 / 260 Ref: SRX-HS-159-02
Supports for 2 fuel cans for jet ski Reference: 52-4910
Original OEM connecting rod from EASY RIDER for Seadoo 1630 watercraft Sold individually Reference: RS-3082
Original OEM Fuel Injector provided by EASY RIDER for Seadoo 1630 watercraft Reference: RS-5558
Cable adapter proposed by EASY RIDER for Seadoo 4-stroke watercraft Reference: RS-4991
PROX piston kit (piston + segments + pin + circlips) for Seadoo 1500 jet ski ref.: 01.5594.XX
Riva thermostat for Seadoo 4tec Ref: RS1013-50-1
WORX RACING Free Exhaust for Seadoo 4 tec watercraft before 2016 (except GTX from 2002-03) Ref: WR04027
Racing exhaust spacer from RIVA Racing for Seadoo Reference: RS18050-ERP
Rear exhaust outlet kit from RIVA Racing for Seadoo brand watercraft from 2010 to 2015 Reference: RS15090-ET
Riva Direct Exhaust for Seadoo RXT / GTX -SC / RXP Ref: RS15050-ET
Stainless steel wear ring 155mm Solas for seadoo 130 / 155 / 185 Ref: SR-HS-156-001
3M pre-glued Hydroturf mat for Seadoo RXT 260 and RXT-X 260 (10-16), Wake 215 (10-15), GTX 155 and 215 (12-15) watercraft (except S models) ref. HT885-PSA All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Ring Kit for Forged Piston in 100mm (99.93mm) from EASY RIDER for Seadoo Watercraft Sold individually Ref: RS-3062
COMETIC Reinforced Head Gasket for Seadoo 1500 Available in 101, 102 or 103mm Ref. C6223-101, C6223-102 or C6223-103
Hydroturf Mat for Seadoo RXT 230, GTX 230, GTX 300 Ltd & Wake Pro 230 (2018 only) Watercraft ref. HT893 All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
COMPRESSOR CLUTCH DISC KIT FOR SEADOO RXT-X/GTX-SC/RXP-X 08 (255HP) Ref: RS1751-HDW-948
Riva free exhaust kit for seadoo all S3 and T3, including RXT-X 260, IS, AS and RXP-X 260 Reference: RS16090
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
LISLE . ENGINE ALIGNMENT TOOL . ASSEMBLY ALIGN SUPPORT PLATE KIT . ( sea-doo all model )
159mm wear ring offered by EASY RIDER for RS-4012 or RS-4013 pump of Seadoo 4-stroke watercraft Reference: RS-4989
AQUA SPORT PERFORMANCE 71° thermostat for Seadoo 4 tec 1503cc watercraft ref. : SD-16004
IControl lever from RIVA RACING for Seadoo watercraft equipped with an IBR ref. : RS24090-ICL
Cylinder Protection Block from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc watercraft all models ref. : SD-12025
Hydroturf Mat for Seadoo GTX 155 Watercraft, GTX Ltd. 215, 230, 300, RXT 260, Wake Pro (16-17) ref. HT886 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
95lbs Fuel Injector from EASY RIDER with aluminum spacer for Seadoo Watercraft Ref: RS-5559
Hydroturf mat for Seadoo RXT 230, GTX 230, GTX 300 Ltd & Wake Pro 230 watercraft (2019 and +) ref. HT8931 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Riva Impeller Spacer for Seadoo Ref: RS23050
Exhaust spacer from AQUA SPORT for Seadoo 4 tec 1503cc watercraft Reference: SD-16001B
Replacement liner for Seadoo 130 / 155 / 185 / 215 / 255 / 260 Ref: RS10050-SLV-1503
RIVA O2 Sensor Installation Kit for Seadoo 1503 ref. RS15050-SK-O2