- For Seadoo 4-stroke watercraft with a 1494 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for best performance in both acceleration and speed.
- For Seadoo 4-stroke watercraft with a 1630 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for best performance in both acceleration and speed.
COVERCRAFT TRANSPORT COVER for Seadoo watercraft Reference: COVERCRAFT-S
IDIARTEC Fixed or Shock Absorbed Column for Sea-doo jet ski in Aluminum or Black version depending on size Reference: IDT-CSRXP/RXT Seadoo RXP / RXT Column
Racing turbine cones from EASY RIDER for Seadoo 1630 watercraft 20V pump Reference: RS-4967
Reinforced transmission shaft bearing kit from EASY RIDER for Seadoo 4-stroke watercraft Reference: RS-4915
Racing turbine cones from EASY RIDER for 16V and 18V pump of Seadoo 1630 watercraft Reference: RS-4966
WORX RACING Free Exhaust for Seadoo 4 tec watercraft before 2016 (except GTX from 2002-03) Ref: WR04027
Riva Racing PRO-SERIES cylinder head gasket for Seadoo 1500cc watercraft from 2005 to 2017 Reference: RS10050-CHG-1503
Racing exhaust spacer from RIVA Racing for Seadoo Reference: RS18050-ERP
Riva scoop for seadoo RXP 215 / 155 from 2004 to 2008 Ref: RS22050
Rear exhaust outlet kit from RIVA Racing for Seadoo brand watercraft from 2010 to 2015 Reference: RS15090-ET
Riva Direct Exhaust for Seadoo RXT / GTX -SC / RXP Ref: RS15050-ET
3M pre-glued Hydroturf mat for Seadoo RXP-X 260 (12-16), RXP-X 300 (16-20) and GTR-X 230 (17-19) watercraft Ref. : HT892-PSA All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Replacement liner for Seadoo 130 / 155 / 185 / 215 / 255 / 260 Ref: RS10050-SLV-1503
Exhaust spacer from AQUA SPORT for Seadoo 4 tec 1503cc watercraft Reference: SD-16001B
Ring Kit for Forged Piston in 100mm (99.93mm) from EASY RIDER for Seadoo Watercraft Sold individually Ref: RS-3062
Rocker Shaft for Hydraulic System from EASY RIDER for Seadoo 1630 Watercraft Reference: RS-4226
Reinforcement plate from EASY RIDER for Seadoo RXP Reference: RS-4957
3M pre-glued Hydroturf mat for Seadoo RXP-X 300 watercraft from 2021 to 2023, RXP-X 325 from 2024 and more Reference: HT8921-PSA All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
155mm Solas stainless steel wear ring for seadoo 130 / 155 / 185 Ref: SR-HS-156-001
LISLE . ENGINE ALIGNMENT TOOL . ASSEMBLY ALIGN SUPPORT PLATE KIT . ( sea-doo all model )
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
COMETIC Reinforced Head Gasket for Seadoo 1500 Available in 101, 102 or 103mm Ref. C6223-101, C6223-102 or C6223-103
Lightweight titanium piston pin from EASY RIDER for Seadoo watercraft Reference: RS-4184
Titanium piston pin from EASY RIDER for original Seadoo watercraft piston Reference: RS-4185
Racing camshaft chain tensioner + plug from EASY RIDER for Seadoo 4-stroke watercraft Reference: RS-4222
159mm wear ring offered by EASY RIDER for RS-4012 or RS-4013 pump of Seadoo 4-stroke watercraft Reference: RS-4989
High performance injector from RIVA Racing by Bosch for Seadoo brand watercraft from 2004 to 2017 Reference: VT1100-INJ
Maptuner HDMI recording cable from RIVA Racing for Yamaha, Kawasaki jet ski Reference: 01-MT061
IControl lever from RIVA RACING for Seadoo watercraft equipped with an IBR ref. : RS24090-ICL
Hydroturf mat for Seadoo RXP watercraft (04-06) ref. HT89 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf mat for Seadoo RXP (06-11), RXP-X (08-11) watercraft ref. HT891 All Hydroturf Products are made to measure and individually. They require a minimum production time of 15 working days. They will not be taken back or exchanged.
WORX OPAS Removal Kit for Seadoo watercraft equipped with opas system Ref: WR06020
95lbs Fuel Injector from EASY RIDER with aluminum spacer for Seadoo Watercraft Ref: RS-5559
155mm wear ring offered by EASY RIDER for Seadoo 4-stroke watercraft RS-4950 pump Reference: RS-4952
159mm wear ring offered by EASY RIDER for Seadoo 4-stroke watercraft RS-4946 pump Reference: RS-4952A
Original OEM wear ring in 159mm offered by EASY RIDER for Seadoo 4-stroke watercraft Reference: RS-4970
Spacer between Original Kawasaki STX 15F jetski plate and Idiartec column Reference: EK-50/15F
RIVA O2 Sensor Installation Kit for Seadoo 1503 ref. RS15050-SK-O2
Riva Impeller Spacer for Seadoo Ref: RS23050
WORX Racing Exhaust System for Seadoo 4tec Watercraft (2017 & +), 300 (2016 & +) Ref: WR04029
Aluminum washers from EASY RIDER for Seadoo RXP Reference: RS-4958
Cylinder head gasket from EASY RIDER 4 blade version for Seadoo watercraft Reference: RS-950770
Lower racing assembly from ESAY RIDER with ball bearing for Seadoo watercraft Reference: RS-6013
Original OEM Turbine Shaft offered by EASY RIDER with nuts for Seadoo 4-stroke watercraft Reference: RS-4930
Original OEM Cylinder Head Gasket in 1630cc from EASY RIDER in 5 blades for Seadoo 300 watercraft Piston dimension in 100mm (not supplied) Reference: RS-3053
COMPRESSOR CLUTCH DISC KIT FOR SEADOO RXT/GTX-SC/RXP 04/05 Ref: RS1751-HDW-945
COMPRESSOR CLUTCH DISC KIT FOR SEADOO RXT-X/GTX-SC/RXP-X 08 (255HP) Ref: RS1751-HDW-948
COMPRESSOR CLUTCH DISC KIT FOR SEADOO RXT/GTX-SC/RXP from 2006 to 2007 Ref: RS1751-HDW-946
Racing exhaust from EASY RIDER, part 2 for Seadoo watercraft Reference: RS-4277
Intake rocker arm for hydraulic system from EASY RIDER for Seadoo 1630 watercraft Reference: RS-4224
Crankshaft pads or bearing shells, RACING version, offered by EASY RIDER, mounts on 1500 / 1630 / 1730cc Compressed for Seadoo Watercraft Reference: RS-4122
Circlip reinforcement from EASY RIDER in 25mm for Seadoo watercraft Reference: RS-5125
EASY RIDER Titanium Intake Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4247
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Screw-in duckbill set for Seadoo from 2009 and up (sold in pairs) Ref: A7027
Worx brand start/stop switch for Seadoo Ref: WR06015
PRO-X Piston 951 XPLTD, GSXLTD, GTXLTD, RX, LRV 1997-07 ref.: 01.5515.XXX
16-tooth compressor tool (SD 215) Ref: 613-96016