WORX Long Fairing Plate for Superjet 96-07 Ref: WR305 The hull plate provides stability and speed and improves grip when cornering.
ADA Racing Cylinder Head for Kawasaki 1100 (Available in two colors, this kit is sold with girdle) Ref: KA1100M-SLV Ref: KA1100M-BLK
WORX special racing fairing plate for Yamaha Superjet from 1996 to 2007 Ref: WR308 The hull plate provides stability and speed and improves grip when cornering.
TUBBIES III Front Sponsons ref. 02-01-004
High performance air filter kit from RIVA Racing for Yamaha Superjet 2-stroke hand jets from 1990 to 2020 and Yamaha Waveblaster jet skis from 1994 to 1997 Reference: RY1301-KIT-1
BLOWSION Flywheel Cover for Yamaha Superjet Hand Jet Reference: 01-03-36X
Sponsors before TUBBIES II RACE ref. 02-01-003
DASA 94mm cylinder liners in 3 versions: Stock stroke 5 port, Stroker 5 port and +16mm Stroker 5 port Ref: WC-1XXX
Jettrim 3 Piece Carpet for Yamaha Superjet 96 and up Freestyle Arm Jet ref. YSJ126
T2 Race Fairing Plate for Yamaha Superjet 2008 and up Ref: PW-03-305-T2-HFC The T2 Race HFC plate by Pro Watercraft Racing is the latest generation of high-performance plates, born in Havasu, the jet-ski capital of the US. This one is perfect in the curves, it provides more stability in a straight line, and a pronounced engagement in the curves. Which...
RIVA Racing hull plate for Superjet TR-1 hand jet, 4-stroke engine from 2021 and up Reference: RY21130
Jettrim 3-piece carpet for Yamaha Superjet 96 and + arm jet (unmodified original hull) ref. YSJ102
DASA 85mm cylinder liners in 3 versions: Stock stroke 7 port, Stroker 7 port and Stock Stroke 5 port Ref: WC-1XXX
DASA 89mm cylinder liners in 2 versions: Stock stroke 5 port and +16mm Stroker 5 port Ref: WC-1811-XX
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
ALUMINUM DIRECT FILLING PLUNGER AND TANK CAP KIT FOR YAMAHA Ref: 01-02-49X
For Yamaha 2-stroke: YB-CD-13/17, YB-CD-14/18, YB-CD-15/19, YB-CD-16/20, YF-CD-11/14, YF-CD-13 /19, YF-CD-14/20, YB-SC-I (14.5-18), YB-SC-J (14.7-18.5), YB-SC-K (15-19), YB-SC-X (15-18), YB-SC-XI (16-19), YD-CD-12/18, YD-CD-13/19, YD -CD-14/20, Y D-SC-X0 (14.5-17.5), YG-CD-18/22, YF-CD-12/18, YD-SC-XI (15.5-18.5), YG-DF-15/22, YD-SC-X (13-16), YD-SC-I...
WORX YAMAHA SJ/BLASTER 90-07 SHOVEL CAP Ref: WR201
IDIARTEC sand filter Ref: IDT-FAS Marine grade aluminum filter housing machined from solid with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Supplied with straight and elbow brass fittings.
RIVA Racing scoop for Superjet TR-1 hand jet, 4-stroke engine from 2021 and up Reference: RY22130
Worx Racing Freeride hull plate for Yamaha jet skis, Superjet 700 model from 2008 to 2020 Reference: WR312
Propellers for all Yamaha 4-stroke 1800cc jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Complete decoration kit from RIVOT Racing for Yamaha Superjet hand jet before 2020 and mainly Orange in color Reference: KDYSO
High Performance fairing plate from RIVA Racing for Yamaha brand hand jet, Superjet model 2-stroke version in 700cc from 2008 to 2020 Reference: RY21011
Complete decoration kit from RIVOT Racing for Yamaha Superjet hand jet before 2020 and predominantly red in color Reference: KDYSR
Pump Shoe aluminum 155mm Rick Roy Reference: PM-SH-AL-155 This part is made of lightweight aluminum from RRP. It fits Rickter, Superjet, Blaster and any other hull using a 155mm Yamaha pump. It can be rebored to 160mm and +
Complete decoration kit from RIVOT Racing for Yamaha Superjet hand jet before 2020 and mainly in Red and Blue. Reference: KDYSRB
RRP Carbon Tube, available in 20" and 26" ref. CB-TUBE-2X Sold individually
MSD IGNITION COIL FOR 2 CYLINDERS 2T ref. 4294
WORX SUPERJET SHOVEL SCOOPER AFTER 2008 Ref: WR228
3 Fuel Can Holders for Jet Ski Reference: 52-4911
RRP water box for Yamaha jet skis, Superjet 700 model from 1996 to 2020 Reference: RRP-OE-WTR-BOX-V2
Professional lifting tool for 1, 2, 3 seater jet skis and SUVs up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
WORX SJ/BLASTER SHOVEL SCOOPER AFTER 08 Ref: WR205
Yamaha Storage and Transport Covers for 2021 and up Superjet hand jets Reference: MWV-CVRSJ-MC-21
Free Flow Exhaust from RIVA Racing for Superjet TR-1 hand jet, 4-stroke engine from 2021 and up Reference: RY16130
Handlebar bag for Yamaha SuperJet Jet ski References: F4R-F847U-V0-00
Supports for 2 fuel cans for jet ski Reference: 52-4910
QUICK VACUUM SHIM KIT ALL STAND UP. WITH ALUMINUM OUTLET Ref: 06-01-022
DASA reinforced and cut in the mass DASA crankcase plate for Yamaha 700cc Ref: CP-7001
Worx Racing sponsons for Yamaha jet skis, Superjet 700 model from 1990 to 2020 Reference: WR544
RIVA Racing Intake Manifold Ring Kit for Yamaha TR-1 Jet Ski Reference: RY12090-IMUK
Blowsion surround and hull protection for arm jet. Pre-glued 3M plastic material and black color, length of 7.6 meters Reference: 04-02-307
MSD ignition support for Yamaha Ref: 01-04-419
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
RIVA Racing Rear Sponson Kit for Superjet TR-1 hand jet, 4-stroke engine from 2021 and up Reference: RY26130
Hydroturf mat for Yamaha superjet 90-95 jet ski Ref. : HT75 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf carpet for Yamaha superjet 96 and + hand jet ref. HT751 All Hydroturf Products are made to measure and individually. They require a minimum production time of 15 working days. They will not be taken back or exchanged.
Girdle kit for ADA cylinder head on Kawasaki 900 / 1100 Ref: KA1100G
Hydroturf mat for Yamaha SuperJet TR-1 hand jet from 2021 and up Reference: HT752 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf Mat for Yamaha Superjet (96-16) Hand Jet with Blowsion Footrests ref. HT751FD All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Fuel sensor from Blowsion for Yamaha jetskis, Superjet 650 and 700 models from 1990 to 2020 Reference: 01-02-501
Pump Shoe plastic 144mm Rick Roy Reference: PM-SH-PLAS-144 This part is made of lightweight plastic from RRP. It fits Rickter, Superjet, Blaster and any other hull using a 144mm Yamaha pump.
Hydroturf Mat for Yamaha Superjet (96-16) Hand Jet with Wamilton Footrests ref. HT751F All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
RRP transmission coupler for all Rickter and Yamaha except 66M/66E/66V Reference: RRP-EG-CPL
JETTRIM central mat for Yamaha superjet 96 and above hand jet ref. YSJ103-B
SOLAS shovel scoop for Yamaha Wave Blaster 700 (93-97) / Superjet 700 (94 and +) Ref: YB-IG-B
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
BNJ ECU or CDI Backing Plate for Yamaha Superjet TR-1 Hand Jet, 4-Stroke Engine 2021 and Up Reference: BNJECUSUP