PRO SERIES version Hydroturf mat for Seadoo GTI 130 / GTI SE 130 (11-18) / GTI SE & LTD watercraft. 155, GTS, WAKE 155, GTR (12-19) Reference: PR884 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
PRO SERIES version Hydroturf mat for Seadoo RXT 215 / RXT-X / RXT-X RS 260 / GTX 155 / WAKE PRO 215 / RXT 260 / RXT 260 RS watercraft Reference: PR885 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
- For 4-stroke Seadoo watercraft with a 1494 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Engine shaft alignment kit for Seadoo watercraft all models except Spark, IS and AS Reference: 950-140K
Reinforced cylinder head studs from EASY RIDER for Seadoo 4-stroke watercraft Ref: RS-4260A
COVERCRAFT TRANSPORT COVER for Seadoo watercraft Reference: COVERCRAFT-S
Riva Racing air filter kit for Seadoo watercraft or jet ski: - RXP / RXT from 2005 to 2010 - RXP-X / RXT-X from 2008 to 2011 - GTX-SC from 2004 to 2009 Reference: RS13050-06-01
Hydroturf seat cover for Seadoo watercraft - GTI 4-Tec from 2006 to 2008 - GTI 130/155 from 2009 to 2010 - Wake 155 from 2009 to 2010 Reference: SEW824
Hydroturf seat cover for Seadoo watercraft : - GTX Di from 2002 to 2003 - GTX 4-Tec from 2002 to 2006 - RXT from 2005 to 2009 - GTX Ltd & Wake from 2006 to 2008 -Wake Pro 215 2009 Reference: SEW88
Complete Engine Gasket Kit from GASKET TECHNOLOGY for Seadoo 4 TEC 1500cc watercraft all models Ref. : 6990K
Riva Racing shovel scoop for Seadoo watercraft - 2018+ models RXT 230 / 300, GTX 230 / 300 and Wake Pro 230 - 2020+ GTR 230 and GTI 130 / 170 models Reference: RS22120
PLX brand wideband air and fuel sensor module for RIVA Racing Maptuner Reference: 897346002726
Worx Starr / Stop ITC control switch for Seadoo 4 stroke Ref: WR06013
Worx brand IBR / ITC control switch for Seadoo 4 stroke Ref: WR06012
IDIARTEC sand filter Ref: IDT-FAS Filter housing in marine quality aluminum machined from mass with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Delivered with straight and elbow brass fittings.
3 Fuel Can Holders for Jet Ski Reference: 52-4911
155mm turbine ring for seadoo 130 / 155 / 185 hp ref. RS33-155-SR
Riva Racing electronic throttle trigger for Seadoo jet ski ref. : RS2406010
Professional lifting tool for hand jets and jet skis 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
AQUA SPORT PERFORMANCE Anodized Water Pump Cover for Seadoo 1500 watercraft ref. : SD-16007B (black) / SD-16007R (red)
EASY RIDER Reinforced Front Engine Mount for Seadoo 4-stroke watercraft Ref: RS-4262
WORX brand IBR control lever for Seadoo 4 stroke Ref: WR06011
WORX brand electronic accelerator lever for Seadoo 4 stroke Ref: WR06010
Adjustable Chain Tensioner from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc and 1600cc watercraft all models ref. : SD-10027
Gasket Technology Top End Gasket Kit for SeaDoo 4 Tec 1500cc All Models Watercraft
Reinforced Turbine Shaft from EASY RIDER with propeller housing close to -2mm for Seadoo 4-stroke watercraft Ref: RS-4926
IBR Riva Racing Trigger for Seadoo Jet Ski ref.: RS2406011
RIVA VALVE LIFT TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
PRO-SERIES cylinder head gasket from Riva Racing for Seadoo 1500cc watercraft from 2005 to 2017 Reference: RS10050-CHG-1503
Original Seadoo bilge pump kit for Sea-doo watercraft - RXT / GTX / Wake Pro from 2018 and above - Fish Pro from 2019 and up - GTI / GTI SE / GTR from 2020 and more - RXP-X from 2021 and up Reference: 295100739
IDIARTEC Fixed or Cushioned Column for Sea-doo jet-ski in Aluminum or Black version depending on the size Reference: IDT-CSRXP/RXT Seadoo RXP / RXT column
Stainless steel wear ring 156mm Solas for seadoo 130 / 155 / 185 Ref: SRX-HS-159-01
PROX piston kit (piston + segments + pin + circlips) for Seadoo 1500 jet ski ref.: 01.5594.XX
Supports for 2 fuel cans for jet ski Reference: 52-4910
Riva thermostat for Seadoo 4tec Ref: RS1013-50-1
WORX RACING Free Exhaust for Seadoo 4 tec watercraft before 2016 (except GTX from 2002-03) Ref: WR04027
Racing exhaust spacer from RIVA Racing for Seadoo Reference: RS18050-ERP
Rear exhaust outlet kit from RIVA Racing for Seadoo brand watercraft from 2010 to 2015 Reference: RS15090-ET
Stainless steel wear ring 155mm Solas for seadoo 130 / 155 / 185 Ref: SR-HS-156-001
3M pre-glued Hydroturf mat for Seadoo RXT 260 and RXT-X 260 (10-16), Wake 215 (10-15), GTX 155 and 215 (12-15) watercraft (except S models) ref. HT885-PSA All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
COMETIC Reinforced Head Gasket for Seadoo 1500 Available in 101, 102 or 103mm Ref. C6223-101, C6223-102 or C6223-103
Hydroturf mat for Seadoo GTI / GTI SE 130, 170 / Wake 170 / GTR 230 watercraft from 2020 and up Reference: HT889 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf Mat for Seadoo RXT 230, GTX 230, GTX 300 Ltd & Wake Pro 230 (2018 only) Watercraft ref. HT893 All Hydroturf Products are custom-made and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
LISLE . ENGINE ALIGNMENT TOOL . ASSEMBLY ALIGN SUPPORT PLATE KIT . ( sea-doo all model )
IControl lever from RIVA RACING for Seadoo watercraft equipped with an IBR ref. : RS24090-ICL
Cylinder Protection Block from AQUA SPORT PERFORMANCE for Seadoo 4 tec 1503cc watercraft all models ref. : SD-12025
Hydroturf Mat for Seadoo GTX 155 Watercraft, GTX Ltd. 215, 230, 300, RXT 260, Wake Pro (16-17) ref. HT886 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf mat for Seadoo GTI 4-Tec (06-10), GTI and GTI SE 130/155, Wake 155 (09-10) watercraft ref. HT824 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Hydroturf mat for Seadoo GTI and GTI SE 130 (11-18) watercraft, GTI SE & Ltd. 155, GTS 130, GTR 215 (12-19), Wake 155 ref. HT884 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Replacement liner for Seadoo 130 / 155 / 185 / 215 / 255 / 260 Ref: RS10050-SLV-1503
Exhaust spacer from AQUA SPORT for Seadoo 4 tec 1503cc watercraft Reference: SD-16001B
Worx brand start/stop switch for Seadoo Ref: WR06015
Screw-in duckbill set for Seadoo from 2009 and up (sold in pairs) Ref: A7027
EASY RIDER Titanium Intake Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4247
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Adaptable fuel injector from WSM or SBT (depending on availability) for Sea-doo 4-stroke jet skis Reference: 006-620 / 006-621 / 006-622 / 006-623 / 006-624
70 degree celsius thermostat from WORX Racing for Seadoo 4 Tec 1503cc watercraft Ref: WR04037
EASY RIDER Lightweight Racing Exhaust Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4215
OPAS RIVA COMPETITION SEA DOO RXP /RXT / GTX (2003+) 215/255 CONDEMNATION KIT References: RS29050-1