Subcategories
Double outlet free exhaust kit from RIVA Racing for seadoo RXT 230, 300, GTX 155, 170, 230, 300 & Wake Pro 230 watercraft Reference: RS15120-D
Cylinder sleeves from RIVA Racing via DARTON for Seadoo 4-stroke watercraft Reference: 800-850
Maptuner NANO kit from RIVA Racing for all Seadoo brand watercraft except Spark from 2005 to 2024 Reference; RS210SC-B-1
High Performance Valve Seats from RIVA Racing for Seadoo 4-stroke watercraft Reference: RS19050-PVS-KIT
Riva ECU reprogramming box (including the Maptuner X box only) ref. 01-MTX
Riva Racing brand sponson for Seadoo watercraft or jet ski: - RXT, GTX from 2018 and up - RXP 2021 and up Reference: RS26190
RIVA RACING water box model 2020 and above for Seadoo GTI / GTX / GTR / RXT / RXP / Wake Pro watercraft Reference: RS16142
Maptuner Nano BRP Data Logging Kit for Seadoo 4-Stroke Watercraft Reference: RS21BRP-LOG-KIT BRAND: Maptuner
ECU/CDI/ECU reprogramming Reference: RECUCDIC
High Performance Valve Guides from RIVA Racing for Seadoo 4-stroke watercraft Reference: RS19050-PVG-KIT
Maptuner NANO from RIVA Racing without license for Seadoo watercraft Reference: 01-NB3A
Complete engine alignment kit for all Seadoo watercraft models except spark Reference: 80-103B
Riva Racing NANO Maptuner with HDMI connection port Reference: 01-NX3A
Large Volume Fuel Pump Kit from RIVA RACING for Seadoo watercraft from 2008 and more Reference: RS12050-340FP-08
Data logging kit for MAPTUNER from RIVA Racing Reference: RY11UNI-LOG-KIT
- For Seadoo 4-stroke watercraft with a 1630 cubic centimeter engine: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Engine shaft alignment kit for Seadoo watercraft all models except Spark, IS and AS Reference: 950-140K
COVERCRAFT TRANSPORT COVER for Seadoo watercraft Reference: COVERCRAFT-S
3 Fuel Can Holders for Jet Ski Reference: 52-4911
RIVA Racing free exhaust kit model 2020 and above for Seadoo RXT / GTX / GTI / RXP / GTR watercraft Reference: RS16121
Original Seadoo bilge pump kit for Sea-doo watercraft - RXT / GTX / Wake Pro from 2018 and above - Fish Pro from 2019 and up - GTI / GTI SE / GTR from 2020 and more - RXP-X from 2021 and up Reference: 295100739
IDIARTEC Fixed or Cushioned Column for Sea-doo jet-ski in Aluminum or Black version depending on the size Reference: IDT-CSRXP/RXT Seadoo RXP / RXT column
Supports for 2 fuel cans for jet ski Reference: 52-4910
WATCON tool for re-pitching the Propellers ref. IMP-142 for 140 to 142mm propeller ref. IMP-148 for 144 to 148mm propeller ref. IMP-160 for 155 to 160mm propeller
LISLE . ENGINE ALIGNMENT TOOL . ASSEMBLY ALIGN SUPPORT PLATE KIT . ( sea-doo all model )
Replacement liner for Seadoo 130 / 155 / 185 / 215 / 255 / 260 Ref: RS10050-SLV-1503
Exhaust spacer from AQUA SPORT for Seadoo 4 tec 1503cc watercraft Reference: SD-16001B
Screw-in duckbill set for Seadoo from 2009 and up (sold in pairs) Ref: A7027
EASY RIDER Titanium Intake Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4247
Adaptable fuel injector from WSM or SBT (depending on availability) for Sea-doo 4-stroke jet skis Reference: 006-620 / 006-621 / 006-622 / 006-623 / 006-624
EASY RIDER Lightweight Racing Exhaust Valve for Seadoo 4-stroke watercraft all models. Ref: RS-4215
70 degree celsius thermostat from WORX Racing for Seadoo 4 Tec 1503cc watercraft Ref: WR04037
RIVA Racing accessory mounting bracket for Seadoo brand watercraft with ST3 hull from 2018 and more Reference: RS11-170 AMB
ODI reinforced handlebar for saddle jet Reference: 06013082
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3329
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3776
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3780
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3778
Reinforced handlebar NEKEN 28mm Yellow ref: 0601-3782
Bonnet attachment strap set ref. 920723812 / 920723815
EASY RIDER Lightweight Racing Intake Valve for Seadoo 4-stroke Watercraft all models. Ref: RS-4211
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and above Reference: CDS-20
Lightened Timing Chain Sprocket from EASY RIDER for Seadoo 4-stroke watercraft Ref: RS-4221
Crankshaft Connector from EASY RIDER for Seadoo 300 watercraft with 1730cc engine Ref: RS-4391
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3777
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-2971
ENGINE ALIGNMENT SHAFT for Seadoo watercraft all models except spark and IS or AS Reference: 950-140
Handlebar with NEKEN reinforced tube of 28mm in the center and 22mm at the end allowing the mounting of any type of handle Reference: 0601-3343
Valve seal kit from EASY RIDER for Seadoo 4-stroke watercraft Reference: RS-4220
Reinforced Turbine Seal from RIVA Racing for 4-hole Seadoo watercraft from 2004 and more Reference: RS23140
Maptuner diagnostic extension harness for Seadoo BRP watercraft Reference: 01-MT067
Hood attachment set from RIVA Racing for jet-ski Reference: RY5-OLK
Duckbill for Seadoo S3 from 2009 and above Ref: RS81090 Quick fit drains in the location of the original drain plugs. One-way non-return valve . Not recommended for use with a jetski stored in water permanently.
RIVA Racing support for MAPTUNERX Reference: RY11-MTX-MB
Screw-on duckbill for Seadoo from 2009 and above (sold individually) Ref: A7026
Reinforced stainless steel washers for Sea-doo hull: Reference: RS4-120-WUK
Exhaust Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-1
Handlebar extension for Seadoo all models except Spark ref. : RS24100-BES
VersiPlug ball bilge drain for Seadoo from 2009 and before, Honda, Polaris and Yamaha from 2004 and +, aluminum or black color ref. PD1401, PD1400 Plastic ball system allows you to empty the hold during navigation and prevent water from entering when the jet ski remains static, using water pressure. Sold individually.
Intake Valve from PRO-X for Seadoo 4-stroke 1500cc watercraft all models ref. : 28.5594-2