Subcategories
Hydroturf saddle cover, HT Premier model for Yamaha FX HO & SVHO jet skis from 2019 and up Reference: AZ-SEWFX3
Hydroturf seat cover, HT Premier model for Yamaha FX HO Cruiser, SVHO Cruiser and Limited jet skis from 2019 and up Reference: AZ-SEWFX3C
Multi-color trigger set (Blue, Gray and Red) from RIVA Racing for Yamaha jetskis with the RiDE system from 2021 and up. Reference RY24160-RCL
RIVA Racing High Volume Fuel Pump Kit (340 L/H) for Yamaha1800 Jetski Ref: RY12040-340FP-KIT
Riva Valve Lifter Tool for Yamaha 1.8L and Kawasaki 1.5L Ref: RY19040-VCT
High Flow Injection Rail from RIVA Racing for Yamaha 1800 jet ski all models Reference: RY12040-BFR
Riva shovel scoop for Yamaha HO / SHO / SVHO 2012 and up Ref: RY22070
COVERCRAFT TRANSPORT COVER for YAMAHA jet ski Reference: COVERCRAFT-Y
Wiseco 86mm (8.6:1) Piston for Yamaha 1.8L from 2009 to 2012 Ref: 40049M08600 Bore 86mm | Ratio 8.6:1 Supplied with segments, clips and axle.
PLX brand wideband air and fuel sensor module for RIVA Racing Maptuner Reference: 897346002726
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Housing + electronic trigger Left side (Brake) with Trim, from IDIARTEC for Yamaha FX HO / SHO / SVHO jet ski Reference: BGG-SHO
IDIARTEC sand filter Ref: IDT-FAS Marine grade aluminum filter housing machined from solid with stainless steel filter calibrated to stop impurities which risk clogging the engine cooling circuit. Supplied with straight and elbow brass fittings.
3-piece Jettrim mat for Yamaha HO/ SHO/ SVHO jet ski 2012 and up ref. YSHO/HO101
Propellers for all Yamaha 4-stroke 1800cc jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for the best performance in both acceleration and speed.
Riva O2 sensor mounting kit for Yamaha 1.8L 2012+ Ref: RY15040-TP-O2
3 Fuel Can Holders for Jet Ski Reference: 52-4911
Professional lifting tool for 1, 2, 3 seater jet skis and SUVs up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
High Performance Valve Guides from RIVA racing for Yamaha 1.8L jet ski Reference: RY19040-PVG-KIT
Housing + electronic trigger right side (accelerator) from IDIARTEC for Yamaha VX HO, FX HO, FX SHO, FX SVHO? FZR SVHO, FZS SVHO and GP1800 jet ski Reference: BGD-SHO
87MM CYLINDER HEAD GASKET FOR YAMAHA FX-SHO/FZR/FZS Ref: RY10040-CHG-87
Riva 86mm Reinforced Cylinder Head Gasket for Yamaha 1.8L Ref: RY10040-CHG-86
88mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688B
Supports for 2 fuel cans for jet ski Reference: 52-4910
Worx Cooling Kit for Yamaha 1.8L Ref: WR04032 Our new Yamaha engine block cooling plate allows up to 3 fittings to be fitted for maximum water flow. Targeted injection points and directs initial cooling around the #2 cylinder which is known for detonation and overheating in high performance applications. This anodized part allows 1, 2 or 3 fittings to be...
RIVA Racing Engine Breather Kit for Yamaha 1800 jet skis from 2012 and up Reference: RY19040-BCC
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
COMETIC Reinforced Cylinder Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
Racing Water Pump Strainer Kit from RIVA for Yamaha 1800 jet ski from 2014 to 2019 Reference: RY1013-WS-80
Racing Water Pump Strainer Kit from RIVA for Yamaha 1800 jet ski from 2020 and above Reference: RY1013-WS-82
Maptuner HDMI recording cable from RIVA Racing for Yamaha, Kawasaki jet ski Reference: 01-MT061
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
Hydroturf mat for Yamaha FX HO, HO Cruiser, SVHO and SVHO Cruiser jet skis from 2019 and up ref. HTFX3 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.
Turbine Wedge Inclined by 2° from WORX Racing for Yamaha 1800 jet-ski Ref: WR05004
Side shim for Yamaha 1.8L ref. RY10040-TB-OIB125
High performance air filter from Riva Racing in original format for Yamaha HO / SHO / SVHO jet skis References: RY13040-OE-2
Underhood storage for Yamaha jetski References: F5G-U511A-V0-00
Turbine shim + 2 degrees from RIVA Racing for Yamaha jet ski Reference: RY23040-PW
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2015 to 2019 Ref: CDS-15/19
Worx fuel pressure regulator for Yamaha 1.8L Ref: WR04025 Increases fuel pressure 10psi Effective alternative to external fuel regulator Ideal for low boost / aftermarket ECU applications
WSM Air Filter (Replacement for OEM) for Yamaha 1800 HO / SHO / SVHO / FZR / FZS / VXR / VXS Replacing the original 6S5-E4451-00-00 ref. 006-590
HOT CAMS 7.48mm 4-stroke Yamaha jet ski VALVE PAD KIT Reference: HCSHIM01
Water filter for pump from RIVA Racing for Yamaha jet ski, model: - FX 140 from 2004 to 2006 - FX 160 from 2005 to 2008 - FX HO from 2008 to 20019 - FX SHO from 2008 to 2019 Reference: RY1013-WS-40
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 30" (76cm) Ref: RY205BK-BAR-2
Handlebar with Reinforcement and Protective Foam RIVA Racing Pro bar in 29" (73cm) Available in Black Anodized or Aluminum Ref: RY203BK-BAR-2 or RY203SI-BAR-2
Double switch (start & stop) from Idiartec for Seadoo watercraft from 2020 and up Reference: CDS-20
86mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688
WORX Racing Reinforced Throttle Body Bracket for Yamaha 1800 Jet Ski Ref.: WR04047
Reinforced Engine Mount from RHAAS Products for Yamaha jet skis all 4-stroke models Ref: YAM4STRMOUNT
Riva Reinforced Shirt for Yamaha 1.8L Ref: RY10040-SLV-615
Yamaha Jet Ski Glove Box Organizer References: F5G-F841P-V0-00
IDIARTEC start and stop switch Ref: CSS
RIVA Racing high volume fuel pump only for Yamaha 1800cc from 2008 to 2024 Reference: RY12040-340FP
Riva anti-cavitation kit for Yamaha HO / SHO / SVHO (2012 and +) with scoop Riva RY22070 Ref: RY25070 This kit allows to plug this mega'tron on the scoop and the water inlet.
RIVA UNIVERSAL WATER FILTER Ref: RY1013-SDF-UK
Riva Valve Seal Kit (16) for Yamaha 1.8L Ref: RY19040-PVS
RIVA Racing air filter, sold alone for jet ski equipped with the RK13090 and RK13100 kit Reference: RK13090-2
Riva transmission shaft passage hose replacement aluminum tube kit for Yamaha HO / SHO / SVHO / FZR / FZS Ref: RY30040-DSS
Yamaha Jet Ski Retractable Cleats References: MWV-PUCLE-AT-07
Blue or Red anodized screw kit from RIVA Racing for the engine cover of your Yamaha 1.8 jet ski, all models. Reference: RY19040-KS